TANNOY CMS 503DC LP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Low Profile) (CMS 503DC LP)

Vendor: Tannoy
TANNOY CMS 503DC LP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Low Profile) (CMS 503DC LP) Introducing the CMS 503DC LP, a powerhouse in the realm of audio...
$229.00
Title

TANNOY CMS 503DC LP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Low Profile) (CMS 503DC LP)

Introducing the CMS 503DC LP, a powerhouse in the realm of audio technology. This speaker boasts a staggering 240-watt capacity with heightened sensitivity, all made possible by harnessing the cutting-edge Ceiling Monitor System technology (CMS 3.0). What sets it apart is its exclusive 5" Dual Concentric point-source driver embedded with Omnimagnet technology on a Torus Ogive Waveguide. This blend of innovation translates to a UL-certified speaker that not only ensures expansive and unwavering broadband directivity but also elevates clarity to new heights. Experience a remarkably precise and consistent audio response that's nothing short of exceptional.

Optimized for Installation

Crafted with precision, the CMS 503DC LP ensures easy installation through its specialized 4-way self-aligning clamp system, simplifying the process while keeping costs in check. Its ultra-shallow back can is tailored for spaces where cavity room is at a premium, providing versatility without compromising on performance. The removable locking screw terminal connector with loop-thru capability enhances convenience while maintaining a secure connection. Included in this versatile package is a low-insertion loss 30 W transformer with accessible front panel tap switching, along with a paintable powder-coated steel mesh grille that not only enhances aesthetics but also shields against dust. You'll find two tile support rails and one C-ring included for added installation support. Additionally, for those seeking further aesthetic finesse, an optional Arco style grille to conceal the unit entirely and a plaster (mud) ring are available for separate purchase.

LAB GRUPPEN Ready

The CMS 503DC LP is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.

PRODUCT FEATURES

  • Full range ceiling loudspeaker for installation applications

  • 60 Watts continuous, 240 Watts peak power

  • Next generation 5" Dual Concentric driver featuring Omnimagnet technology

  • Torus Ogive waveguide for improved high frequency response and directivity

  • Ultra-shallow depth profile for applications where cavity space is restricted

  • UL 1480 certified for general signalling systems

  • UL 2043 certified for air-handling spaces

  • Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input

  • Low insertion loss 30 W line transformer with easily accessible tapping switch

  • Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel

  • Semi matt white finish fits unobtrusively in any environment

  • Powder coated UV resistant perforated steel mesh grille with dust protection

  • Removable magnetic grille for custom painting

  • Optional ARCO designer grilles available for minimal architectural impact

  • Self-aligning 4 way clamp mounting system

  • Mounting C-ring and ceiling tile rails included

Performance
Frequency response (-3 dB) (1)

88 Hz - 22 kHz

Frequency range (-10 dB) (1)

77 Hz - 24 kHz

Frequency range (-10 dB) (1)

System sensitivity (1 W @ 1 m) (2)

89 dB (1 W = 4 V for 16 Ohms)

Nominal coverage angle

90 degrees conical

Power handling (3)
Average

60 W

Programme

120 W

Peak

240 W

Recommended amplifier power

120 W @ 16 Ohms

Nominal impedance (Lo, Z)

16 Ohms

Rated maximum SPL
Average

107 dB

Peak

113 dB

Transformer taps (via front rotary switch)
70 V

30 W (165 O) / 15 W (330 O) /
7.5 W (660 O) / 3.75 W (1320 O) /
OFF & low impedance operation

100 V

30 W (330 O) / 15 W (660 O) /
7.5 W (1320 O) / OFF & low
impedance operation

Transducers
Dual concentric point source driver

1 x 130 mm (5.0") Dual Concentric driver,
using Omnimagnet technology

Low frequency

35 mm (1.38") voice coil,
treated multi fi ber paper pulp cone

High frequency

20 mm (0.79") PEI dome

Physical
Enclosure
Backcan

Zinc plated steel

Baffle

Reflex loaded UL 94V-0 rated ABS

Grille

Steel, with weather resistant coating

Safety features

Safety ring located at rear of enclosure
for load bearing safety bond

Clamping design

Security toggle clamp Min / Max
clamping range 9.5 mm (0.37") /
60 mm (2.36") Recommended
clamp torque: 1.5 Nm

Backcan options
Blind mount (BM)

Pre install (PI)

Cable entry options

Cable clamp & squeeze connector for
conduit up to 22 mm

Conduit knockouts on PI Backcan

Connectors

Removable locking connector
with screw terminals with
“loop through” facility

Compliance

UL-1480, UL-2043, CE

Dimensions
Bezel diameter

274.0 mm (10.79")

Front of ceiling to rear of backcan

98.6 mm (3.88")

BM model: Front of ceiling to <br />rear of backcan

BM model: Front of ceiling <br />to top of safety loop

PI model: Front of ceiling surface <br />to rear of speaker unit

PI model: Front of accessory backcan <br />bezel to top of safety loop

Hole cutout diameter (all models)

253.0 mm (9.96")

Net weight (ea)

4.7 kg (10.36 lbs)

CMS 803DC BM

CMS 803DC PI

PI Backcan

Included accessories

C-Ring, tile-bridge kit, paint mask,
cut-out template, grille

Optional accessories

Plaster (mud) ring, Arco grille

Packed quantity

2