TANNOY CMS 503DC LP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Low Profile) (CMS 503DC LP)
Vendor: Tannoy
Available
TANNOY CMS 503DC LP 5" Full Range Ceiling Loudspeaker with Dual Concentric Driver for Installation Applications (Low Profile) (CMS 503DC LP)
Introducing the CMS 503DC LP, a powerhouse in the realm of audio technology. This speaker boasts a staggering 240-watt capacity with heightened sensitivity, all made possible by harnessing the cutting-edge Ceiling Monitor System technology (CMS 3.0). What sets it apart is its exclusive 5" Dual Concentric point-source driver embedded with Omnimagnet technology on a Torus Ogive Waveguide. This blend of innovation translates to a UL-certified speaker that not only ensures expansive and unwavering broadband directivity but also elevates clarity to new heights. Experience a remarkably precise and consistent audio response that's nothing short of exceptional.
Optimized for Installation
Crafted with precision, the CMS 503DC LP ensures easy installation through its specialized 4-way self-aligning clamp system, simplifying the process while keeping costs in check. Its ultra-shallow back can is tailored for spaces where cavity room is at a premium, providing versatility without compromising on performance. The removable locking screw terminal connector with loop-thru capability enhances convenience while maintaining a secure connection. Included in this versatile package is a low-insertion loss 30 W transformer with accessible front panel tap switching, along with a paintable powder-coated steel mesh grille that not only enhances aesthetics but also shields against dust. You'll find two tile support rails and one C-ring included for added installation support. Additionally, for those seeking further aesthetic finesse, an optional Arco style grille to conceal the unit entirely and a plaster (mud) ring are available for separate purchase.
LAB GRUPPEN Ready
The CMS 503DC LP is finished in semi-matt white and optimized for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.
PRODUCT FEATURES
-
Full range ceiling loudspeaker for installation applications
-
60 Watts continuous, 240 Watts peak power
-
Next generation 5" Dual Concentric driver featuring Omnimagnet technology
-
Torus Ogive waveguide for improved high frequency response and directivity
-
Ultra-shallow depth profile for applications where cavity space is restricted
-
UL 1480 certified for general signalling systems
-
UL 2043 certified for air-handling spaces
-
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
-
Low insertion loss 30 W line transformer with easily accessible tapping switch
-
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
-
Semi matt white finish fits unobtrusively in any environment
-
Powder coated UV resistant perforated steel mesh grille with dust protection
-
Removable magnetic grille for custom painting
-
Optional ARCO designer grilles available for minimal architectural impact
-
Self-aligning 4 way clamp mounting system
-
Mounting C-ring and ceiling tile rails included
Performance
Frequency response (-3 dB) (1) |
88 Hz - 22 kHz |
Frequency range (-10 dB) (1) |
77 Hz - 24 kHz |
Frequency range (-10 dB) (1) |
— |
System sensitivity (1 W @ 1 m) (2) |
89 dB (1 W = 4 V for 16 Ohms) |
Nominal coverage angle |
90 degrees conical |
Power handling (3) | |
Average |
60 W |
Programme |
120 W |
Peak |
240 W |
Recommended amplifier power |
120 W @ 16 Ohms |
Nominal impedance (Lo, Z) |
16 Ohms |
Rated maximum SPL | |
Average |
107 dB |
Peak |
113 dB |
Transformer taps (via front rotary switch) | |
70 V |
30 W (165 O) / 15 W (330 O) / |
100 V |
30 W (330 O) / 15 W (660 O) / |
Transducers
Dual concentric point source driver |
1 x 130 mm (5.0") Dual Concentric driver, |
Low frequency |
35 mm (1.38") voice coil, |
High frequency |
20 mm (0.79") PEI dome |
Physical
Enclosure | |
Backcan |
Zinc plated steel |
Baffle |
Reflex loaded UL 94V-0 rated ABS |
Grille |
Steel, with weather resistant coating |
Safety features |
Safety ring located at rear of enclosure |
Clamping design |
Security toggle clamp Min / Max |
Backcan options | |
Blind mount (BM) |
— |
Pre install (PI) |
— |
Cable entry options |
Cable clamp & squeeze connector for |
Conduit knockouts on PI Backcan |
— |
Connectors |
Removable locking connector |
Compliance |
UL-1480, UL-2043, CE |
Dimensions | |
Bezel diameter |
274.0 mm (10.79") |
Front of ceiling to rear of backcan |
98.6 mm (3.88") |
BM model: Front of ceiling to <br />rear of backcan |
— |
BM model: Front of ceiling <br />to top of safety loop |
— |
PI model: Front of ceiling surface <br />to rear of speaker unit |
— |
PI model: Front of accessory backcan <br />bezel to top of safety loop |
— |
Hole cutout diameter (all models) |
253.0 mm (9.96") |
Net weight (ea) |
4.7 kg (10.36 lbs) |
CMS 803DC BM |
— |
CMS 803DC PI |
— |
PI Backcan |
— |
Included accessories |
C-Ring, tile-bridge kit, paint mask, |
Optional accessories |
Plaster (mud) ring, Arco grille |
Packed quantity |
2 |