Telex RTS SS-2002U 2CH wall mount speaker station with WKP-box enclosure
Vendor: Telex RTS
Telex RTS SS-2002U 2CH wall mount speaker station with WKP-box enclosure The U-Box is an essential solution for securely wall-mounting speaker stations. It is expertly designed to attach to studs and comes with...
Available
Telex RTS SS-2002U 2CH wall mount speaker station with WKP-box enclosure
The U-Box is an essential solution for securely wall-mounting speaker stations. It is expertly designed to attach to studs and comes with top and bottom (or side, depending on the mounting orientation) access holes for seamless and permanent installations. This means you can easily connect intercom cabling directly to the terminals on the back of the speaker station for a hassle-free setup.
Features
- 2-channel in-wall intercom speaker station with U-box enclosure and full send-receive capability
- 4-watt speaker
- Simplified push-type wiring terminal block
- Internal DIP setup switch control and full sidetone adjustment trim
- Backlit Channel Select switch
- Backlit front panel control switches for Talk, Call, Listen, Speaker and Panel Mic
- Talk key with push-to-talk and hands-free latching operation modes
- Panel Mic Key switches between built-in electret and optional gooseneck
- 24VDC phantom power
Frequency Response |
Send and Receive: 20 Hz - 20 kHz +/-800Hz, 100mVrms Mic Kill/Detect: 24 kHz +/-800Hz, 100mVrms |
Gain | 35dB |
Microphone Input Type |
1 x XLR-4M (Headset Mic) 1 x 1/4" TRS Phone (Gooseneck Panel Mic) |
Limiter | No |
Power Output |
Unbalanced Mode: 1 Vrms, +/-10% Balanced Mode: 1 Vrms |
Speaker | 8 Ohms |
SPL | Not Specified by Manufacturer |
Signal-to-Noise Ratio | Not Specified by Manufacturer |
THD + N | Not Specified by Manufacturer |
Panel Microphone Preamp | Yes |
Program Amplifier | Yes |
Speaker Amplifier | 4 Watts |
Input Level | -40dB - +35dB |
Input Impedance |
Headset Headphones: 150 - 600 Ohms Headset Microphone: 50 - 200 Ohms Panel Mic(Built-In): 2.2 kOhms Panel Mic (Gooseneck): 5 kOhms Intercom Channels(Balanced): 300 Ohms Intercom Channels(Unbalanced): 200 Ohms |
Internal Connectors | Push-type wire terminals |
Internal Controls |
1 x Side Tone Trim 1 x Mic Kill Receive DIP Switch 1 x call Signal Method DIP Switch 1 x Incoming Call Beep DIP Switch 1 x Microphone Type DIP Switch 1 x Incoming Call Speaker Beep DIP Switch |
Front Panel Controls and Indicators |
1 x Channel Select Button 1 x Panel Mic Button 1 x Headset Button 1 x Listen Button 1 x Call Button 1 x Talk Button 1 x Volume Trim |
Power Requirements |
Phantom Power: 24VDC Nominal (12 - 30VDC, 175mA) Local Power: 12 - 15VDC, 250mA |
Dimensions | 8.11 x 3.15 x 6.1"(WxDxH) (206 x 80 x 155mm) |
Weight | 4.5 |
Related Product
Prev
Next
Telex RTS MCP2 Single rackmount kit for SSA-324/SSA-424
Telex RTS MCP2 Single rackmount kit for SSA-324/SSA-424 Mounting brackets are the key to the RTS modular user station design...
$200.00
Telex RTS MCP1 Rack Mount Kit for Telex SSA-324/424 Hybrid Intercom Interfaces
Telex RTS MCP1 Rack Mount Kit for Telex SSA-324/424 Hybrid Intercom Interfaces This is a rack mount kit for two...
$200.00
Telex RTS SSA324-#U Two-to-Four-Wire Converter Interface for Intercom Systems
Telex RTS SSA324-#U Two-to-Four-Wire Converter Interface for Intercom Systems This intercom system-to-system adapter interconnects the voice signals from different intercom...
$1,292.00
Telex RTS SSA324 2 Channel, 2 Wire to 4 Wire Intercom System Interface Converter with Call Signal
Telex RTS SSA324 2 Channel, 2 Wire to 4 Wire Intercom System Interface Converter with Call Signal The Telex SSA324...
$941.00
Telex RTS BOP220 Breakout Panel for SAP-1626
Telex RTS BOP220 Breakout Panel for SAP-1626 The BOP-220 Breakout Panel for SAP-1626 from Telex is an I/O connector translation...
$862.00
Telex RTS SAP1626 Source Assignment Panel
Telex RTS SAP1626 Source Assignment Panel The SAP1626 Source Assignment Panel from Telex is viewed as a matrix switch capable of transforming two bus...
$6,396.00
Telex SAP612 Source assignment panel
Telex SAP612 Source assignment panel Source assignment panel (1RU). Transforms a basic two bus intercom system into a 6 bus...
$384.00
Telex RTS 4025A 1x4 25-Pair, 50-Pin Passive Splitter for 800 and 4000-Series
Telex RTS 4025A 1x4 25-Pair, 50-Pin Passive Splitter for 800 and 4000-Series The 4025A 1x4 25-Pair, 50-Pin Passive Splitter for...
$397.00
Telex RTS IFB-325 1CH IFB beltpack
Telex RTS IFB-325 1CH IFB beltpack The IFB-325 is a listen only IFB earset station with one channel. The IFB-325...
$332.00
Telex RTS 4030 2CH IFB beltpack
Telex RTS 4030 2CH IFB beltpack The 4030 are listenonly beltpacks with two and one channels, respectively. The 4030 contains...
$445.00
Telex RTS 4010 Central IFB Electronics Station
Telex RTS 4010 Central IFB Electronics Station The Telex 4010 Central IFB Electronics Station provides an active link between the IFB-325 user...
$3,495.00
Telex RTS 4001 4-Position Control Station For 4 IFB, 1 SA
Telex RTS 4001 4-Position Control Station For 4 IFB, 1 SA The Telex 4-Position Control Station For 4 IFB, 1 SA allows...
$1,088.00
Telex RTS BP5000A5F Universal Intercom Beltpack
Telex RTS BP5000A5F Universal Intercom Beltpack
Dual Channel Universal Belt Pack, A5F Headset Jack
$505.00
Telex RTS BP5000A4F Dual Channel Universal Beltpack Headset Station/A4F Headset Jack
Telex RTS BP5000A4F Dual Channel Universal Beltpack Headset Station/A4F Headset Jack
Dual Channel Universal Belt Pack, A4F Headset Jack
$505.00
Telex RTS BP4000A4F Single-Channel Portable Beltpack Headset Station (4-Pin XLR, Female)
Telex RTS BP4000A4F Single-Channel Portable Beltpack Headset Station (4-Pin XLR, Female) With the Telex BP4000A4F Single-Channel Portable Beltpack Headset Station, you...
$379.00
Telex RTS WMS-300L Wall Mount User Station w/ A5F Headset Connector
Telex RTS WMS-300L Wall Mount User Station w/ A5F Headset Connector The WMS-300L Wall Mount User Station with A5F Headset...
$1,156.00