Turbosound TCX102-R-WH, Turbosound 2 Way 10'' Loudspeaker for Installation Applications (Weather Resistant, White) 90x60 dispersion

Vendor: Turbosound
Descriptions Turbosound TCX102-R-WH, Turbosound 2 Way 10'' Loudspeaker for Installation Applications (Weather Resistant, White) 90x60 dispersion The Turbosound TCX102-R-WH is a 10" 2-Way Weather-Resistant Loudspeaker from Turbosound. This Turbosound TCX102-R-WH is 1000W compact 10" passive loudspeaker that...
$600.00
Title

Turbosound TCX102-R-WH, Turbosound 2 Way 10'' Loudspeaker for Installation Applications (Weather Resistant, White) 90x60 dispersion

The Turbosound TCX102-R-WH is a 10" 2-Way Weather-Resistant Loudspeaker from Turbosound. This Turbosound TCX102-R-WH is 1000W compact 10" passive loudspeaker that is perfect for a wide range of portable or installed speech and music sound reinforcement applications. The Turbosound TCX102-R-WH is constructed from 0.6" birch plywood, the cabinet is finished in semi matt white textured paint. It consists of a trapezoidal enclosure housing a high excursion 10" reflex-loaded low frequency driver with low mass voice coil for improved transient response, and a 1" high temperature dome compression driver mounted on a rotatable converging elliptical waveguide, which provides a 90° horizontal by 60° vertical dispersion pattern. The loudspeaker’s compression driver is mated to a converging elliptical waveguide that is rotatable through 90°, allowing a swap of the horizontal and vertical dispersion patterns for a smooth wave front, while providing exceptional pattern control. This is useful for retaining wide horizontal dispersion when the enclosure is mounted horizontally due to ceiling height restrictions.

A perforated steel mesh grille backed with reticulated foam protects the drive units. The rear panel of this Turbosound TCX102-R-WH features a sealed captive cable and gland. The weatherized paint, zinc plated grill with outdoor powder coat, and weather resistant coated drivers deliver an iP54 rated package that is suitable for outdoor use. The cabinet is fitted with M6, M8, and M10 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and mounted in many different configurations in permanent installations. Adjustment of the length of the rear cable allows the cabinet to be angled for optimum room coverage. The horn of each cabinet may be rotated through 90° to optimize the coverage. The cabinet is compatible with industry standard wall and ceiling brackets.

Turbosound TCX102-R-WH Main Features

  • Two way loudspeaker for installation applications
  • Offers 250W continuous and 1000W peak power
  • All components weather resistant to IP54 for outdoor use
  • High excursion 10" low frequency driver with low mass voice coil for improved transient response
  • High temperature 1" dome compression driver with extended high frequency reproduction
  • Rotatable converging elliptical waveguide provides 90° H x 60° V dispersion
  • M10, M8 and M6 rigging points compatible with Turbosound and OmniMount brackets
  • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
  • Birch plywood enclosure (0.6") with hard wearing semi matt white paint finish
  • Powder coated perforated plated steel mesh grille with foam backing
  • Captive cable tail with sealed cable gland on aluminum connector panel
System
Frequency Response  100 Hz to 20 kHz, ±3 dB; 68 Hz to 20 kHz, -10 dB
Nominal Dispersion  90° H x 60° V @ -6 dB points
Power Handling  Continuous: 250 W
 Peak: 1000 W
Sensitivity  95 dB (1 W @ 3.3' (1.0 m))
Maximum SPL  Continuous: 119 dB
 Peak: 125 dB
Impedance  8 Ω
Components  1 x 10" (254 mm) LF driver
 1 x 1" (25 mm) HF compression driver
Enclosure
Connectors  2-core captive cable tail
Construction  0.6" (15.0 mm) birch plywood
Grille  Powder-coated perforated zinc plated steel
Mounting Interface  M10 x 10, M8 x 4, M6 x 4 Points
Dimensions (H x W x D)  19.2 x 14.4 x 13.1" (48.8 x 36.6 x 33.2 cm)
Weight  33.2 lb (15.1 kg)