Audix ADX20iP, MIC, MINI INST, CARD, W/6' CBL TO TA3F, · Butterfly type clip ideal for brass instruments

Audix ADX20iP, MIC, MINI INST, CARD, W/6' CBL TO TA3F, · Butterfly type clip ideal for brass instruments

The Audix ADX20iP assembled and designed by Audix in the USA, the Audix ADX20iP is a miniaturized condenser microphone used for professional stage and studio applications. The Audix ADX20iP features its clarity, excellent transient response, resistance to feedback, SPL handling and very easy to operate. The Audix ADX20iP is primarily used for miking saxophone and other brass instruments. Also, the Audix ADX20iP is characterized with a uniformly controlled cardioid polar pattern.

Because of that, the Audix ADX20iP provides excellent isolation and feedback control on stage as well as natural sound reproduction at very close distances. The Audix ADX20iP is designed for use with Audix wireless systems. The ADX20iP is designed for use with a standard microphone cable. The ADX20iP operates on phantom voltage of 5-52 Volts and is supplied with a phantom power adapter (APS910), 6’ integrated microphone cable, gooseneck clip (MC20i) and carrying pouch

Audix ADX20iP Product Features

• Miniature condenser clip-on microphone
• Can be used wired or wireless
• Natural, accurate sound reproduction
• Butterfly type clip ideal for brass instruments
• Rubber shock mount system reduces vibration
• Designed, assembled & tested in the USA
• 3 year warranty

Transducer Type : Pre-Polarized Condenser
Frequency Response : 40 Hz - 20 kHz
Polar Pattern : Cardioid
Output Impedance : 250 ohms
Sensitivity Cardioid : - 6 mV / Pa @ 1k
Hypercardioid : - 5.6 mV / Pa @1k
Equivalent Noise Level : <29 dB (A-weighted)
Signal to Noise Ratio : >65 dB
Maximum SPL : ≥135 dB
Power Requirements : 9-52 V phantom
Connector : Shielded 6’ terminating to a
miniature 3 pin XLRf
Polarity : Positive pressure on diaphragm
produces positive voltage on pin
2 relative to pin 3
Materials / Finish : Machined Brass Capsule / Black
Finish
Weight : 48 g / 1.7 oz
Length : 29 mm / 1.14 in