Audix AP61SAX, WIRELS,R61,HH, W/ADX20I 522-586MHz, R61 True Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone
Vendor: Audix
Available
Audix AP61SAX, WIRELS,R61,HH, W/ADX20I 522-586MHz, R61 True Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone
The Audix AP61SAX feature its professional true diversity wireless system featuring the ADX20i clip on cardioid condenser for sax, trumpet and brass instruments. The ADX20i in the Audix AP61SAX handles high sound pressure levels and provides natural sound reproduction at very close distances. The Audix AP61SAX also features a lightweight, compact and easy to use ADX20i features a shock mounted clip to help reduce noise and vibration. The spring tension clip on the Audix AP61SAX makes for easy mounting on the bell of an instrument, and a flexible gooseneck allows for precise positioning. A single space rackmount kit with BNC cables for front mounting antennas is included. Optional accessories include rackmount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels)
Audix AP61SAX Product Features
R61 True Diversity Receiver
- 64 MHz Wide spectrum tuning receiver
- 207 Pre-coordinated frequencies for quick, easy and reliable set up
- One-touch auto scan searches for clear channel
- One-touch sync links transmitter to receiver via infrared beam
- 2560 tunable frequencies
B60 Bodypack Transmitter
- 64 MHz Wide spectrum transmitter
- Durable metal housing
- 14 Hour run time - AA batteries
ADX20i Clip on Condenser Microphone
Audix R61 Kit Single-Channel Wireless True Diversity Receiver (522 To 586 MHz) Specs
PhysicalFrequency Band | 522 to 586 MHz |
Bandwidth | 64 MHz |
# Of Simultaneous Systems | Up to 24 |
Switchable Frequencies | 207 pre-coordinated frequencies |
Reception Frequencies | 2560 tunable frequencies (spaced 25 kHz apart) |
Wireless Range | Up to 450' / 137 m |
Antenna Connector | 2 x BNC (8 VDC, 150 mA) |
Outputs | 1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced |
Audio Output Level | XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain |
Audio Level Control | -12 to +9 dB in 3-dB steps |
Frequency Response | 45 Hz to 18 kHz |
Compander | 2:1 |
Pilot Tone | 32 kHz |
Receiving System | Dual tuner, true diversity |
Signal to Noise Ratio | 112 dB at 30 kHz deviation (A-weighted) |
Total Harmonic Distortion (THD) | <0.4% (33 kHz deviation at 1 kHz) |
Sensitivity | 5 dBµV (S/N 60 dB at 25 kHz deviation, A- weighted) |
Power Requirement | 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A |
Enclosure Material | Metal |
Dimensions (W x D x H) | 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm |
Weight | 2.4 lb / 1.1 kg |
Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs
PhysicalRF Power Output | 10/30 mW |
Bandwidth | 64 MHz |
Gain Adjustment | 0 dB, -6 dB, -12 dB, -24 dB |
Inputs | 1 x mini-XLR 3-pin |
Input Impedance | Mic: 10 kOhms Line: 1 MOhm |
Maximum SPL | Approximately 128 to 140 dB (depending on microphone) |
Battery Life | Approximately 14 hours |
Current Consumption | 110 mA typical |
Power Requirement | 2 x AA 1.5 V batteries |
Dimensions (W x L x D) | 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm |
Weight | 3 oz / 85 g without batteries |
Capsule | Condenser |
Polar Pattern | Cardioid |
Pad | None |
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 130 dB SPL |
Impedance | 250 Ohms |
Signal-to-Noise Ratio | 65 dB |
Output Connectors | 1 x TA3M 3-Pin |
Operating Voltage | 9 to 52 V (Phantom Power) |
Dimensions | ø: 0.47 x L: 1.14" / ø: 12 x L: 29 mm |
Weight | 1.7 oz / 4.7 g |