Pro Intercom EC2 econoCom 2 Beltpack System 1 PS4, 1 ECADAPTER, 2 BP1 Beltpacks (No headsets)

Pro Intercom EC2 econoCom 2 Beltpack System  1 PS4, 1 ECADAPTER, 2 BP1 Beltpacks (No headsets)

2 User econoCom Intercom System without Headsets

The Pro Intercom EC2 is a econoCom system that is consisting of a (1) a table-top (AD2410) AC adaptor with removable IEC power cord, and a cable with connector which is connecting the AD2410 to the PS4 interface box, and; (2) a PS4 system interface. These two devices, integrated together, are the power supply of the system. Also included are two, three or four of our standard full-featured BP1 belt packs, and a headset, with connector, for each belt pack. The systems are also available with no headsets. The system does comes with a included signal light feature.

The econoCom power supply components are not designed to be used in systems that comes with included more than two loudspeaker stations or stage manager stations, and don't provide multiple circuits. One to six more BP1 belt packs (for a maximum total of ten) is possible to be added to the system with no creation of hum or overheating the power supply components.

Older belt-packs, particularly those with incandescent (rather than LED) signal lamps should be added with caution as they draw much more current. The AC adaptor provides up to 1.0A of current at a nominal 24VDC. It is UL CE and CSA approved. It has universal input, operating at any voltage from 100 to 240VAC at either 50 or 60 HZ. The PS4 system interface provides precise voltage regulation, further smoothing of the DC current (AC hum elimination), automatic overload/short-circuit protection, the necessary termination network for the intercom circuit, an LED indicator which indicates that 24VDC is being delivered, and 3 paralleled XLR jacks for connection of headset stations or strings of stations in a party-line configuration.The components of an econoCom system are connected together using standard 2-conductor shielded microphone cables fitted with 3 pin XLR connectors (male/female). The PS4 has three outlets which are in parallel and the BP1s have a male and a female XLR for connecting to the PS4 and for looping onwards to the next BP1.

• 1 PS4, 1 ECADAPTER, 2 BP1 Beltpacks (No headsets)