Yamaha Dante-MY16 AUD Dante Card for Digital Mixers

Descriptions

Yamaha Dante-MY16 AUD Dante Card for Digital Mixers

The Yamaha Dante-MY16-AUD is a Mini-YGDAI Card is an expansion card for use with Yamaha Professional audio equipment. Yamaha Dante-MY16-AUD allows the transmission and reception of up to 32 (16x16) channels at 44.1kHz or 48kHz, or 16 (8x8) channels at 88.2kHz or 96kHz of uncompressed 16, 24 or 32-bit digital audio data, using Audinate’s Dante audio networking standard. The Yamaha Dante-MY16-AUD card is a fully compatible in Yamaha Mini-YGDAI standard interface connector that allowing it to be installed in a range of compatible Yamaha equipment. The Gigabit Ethernet connectors ensure low latency, high-quality synchronization audio.

The Yamaha Dante-MY16-AUD has a features of sample rate pull-up/down that can be used to synchronized audio with video that has undergone frame rate conversion. Yamaha Dante-MY16-AUD includes 2x RJ-45 connectors for Dante I/O, 1x D-sub 9 pin connector for RS232-C. The Yamaha Dante-MY16-AUD cards are can be daisy-chained together via the secondary Ethernet port and it can be PIN-locked and unlocked using Dante controller. One of the best features of The Yamaha Dante-MY16-AUD cards is more than 16 audio channels can be transferred when used with multiple Yamaha Dante-MY16-AUD and it allows direct PC or Mac audio input and output without the need for an audio interface.

The Yamaha Dante-MY16-AUD Product Highlights

• Supports 44.1 and 88.2kHz sample rates, in addition to the previously-supported 48 and 96 kHz sample rates.
• Sample rate pull-up/down can be used to synchronise audio with video that has undergone frame rate conversion.
• Dante-MY16-AUD2 cards can be daisy chained together via the secondary Ethernet port.
• Dante-MY16-AUD2 can be PIN-locked and unlocked using Dante Controller.
• 2x RJ-45 connectors for Dante I/O, 1x D-sub 9 pin connector for RS232-C.
• Latency can be selected from five preset values: 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms.
• More than 16 audio channels can be transferred when used with multiple Dante-MY16-AUD2 cards.
• Automatic discovery and setup for network devices. Devices names can be specified as required.
• Allows direct PC or Mac audio input and output without the need for an audio interface.

Mini-YGDAI Card Support for Dante Digital Audio Networking

General Specifications

• Audio channels - 16IN / 16OUT
• Sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
• Sample rate pull-up/down - +4.1667, +0.1, -0.1, and - 4.0 %
• Sample bit-depth - 16, 24 or 32-bit PCM
• Network - 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
• Redundancy - Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
• Daisy chaining - Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
• HA Remote - Support for HA Remote capable Yamaha products
• Expandable - Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64x64 audio channels

Compatible Yamaha equipments

• Digital Mixers - CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
• Interfaces - RSio64-D
• Processors - MRX7-D, MTX5-D, DME24N, DME64N
• Power Amps - TX4n, TX5n, TX6n