Yamaha Dante-MY16 AUD Dante Card for Digital Mixers

Vendor: Yamaha
Descriptions Yamaha Dante-MY16 AUD Dante Card for Digital Mixers The Yamaha Dante-MY16-AUD is a Mini-YGDAI Card is an expansion card for use with Yamaha Professional audio equipment. Yamaha Dante-MY16-AUD allows the transmission and...
$689.00
Title

Descriptions

Yamaha Dante-MY16 AUD Dante Card for Digital Mixers

The Yamaha Dante-MY16-AUD is a Mini-YGDAI Card is an expansion card for use with Yamaha Professional audio equipment. Yamaha Dante-MY16-AUD allows the transmission and reception of up to 32 (16x16) channels at 44.1kHz or 48kHz, or 16 (8x8) channels at 88.2kHz or 96kHz of uncompressed 16, 24 or 32-bit digital audio data, using Audinate’s Dante audio networking standard. The Yamaha Dante-MY16-AUD card is a fully compatible in Yamaha Mini-YGDAI standard interface connector that allowing it to be installed in a range of compatible Yamaha equipment. The Gigabit Ethernet connectors ensure low latency, high-quality synchronization audio.

The Yamaha Dante-MY16-AUD has a features of sample rate pull-up/down that can be used to synchronized audio with video that has undergone frame rate conversion. Yamaha Dante-MY16-AUD includes 2x RJ-45 connectors for Dante I/O, 1x D-sub 9 pin connector for RS232-C. The Yamaha Dante-MY16-AUD cards are can be daisy-chained together via the secondary Ethernet port and it can be PIN-locked and unlocked using Dante controller. One of the best features of The Yamaha Dante-MY16-AUD cards is more than 16 audio channels can be transferred when used with multiple Yamaha Dante-MY16-AUD and it allows direct PC or Mac audio input and output without the need for an audio interface.

The Yamaha Dante-MY16-AUD Product Highlights

  • Supports 44.1 and 88.2kHz sample rates, in addition to the previously-supported 48 and 96 kHz sample rates.
  • Sample rate pull-up/down can be used to synchronise audio with video that has undergone frame rate conversion.
  • Dante-MY16-AUD2 cards can be daisy chained together via the secondary Ethernet port.
  • Dante-MY16-AUD2 can be PIN-locked and unlocked using Dante Controller.
  • 2x RJ-45 connectors for Dante I/O, 1x D-sub 9 pin connector for RS232-C.
  • Latency can be selected from five preset values: 0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, or 5.0 ms.
  • More than 16 audio channels can be transferred when used with multiple Dante-MY16-AUD2 cards.
  • Automatic discovery and setup for network devices. Devices names can be specified as required.
  • Allows direct PC or Mac audio input and output without the need for an audio interface.

Mini-YGDAI Card Support for Dante Digital Audio Networking

Dante-MY16-AUD2 card is a fully compatible Yamaha Mini-YGDAI standard card that instantly Dante enables your Yamaha mixer, processor or power amp. Each Dante-MY16-AUD2 provides 16 bidirectional audio channels (8 at 96 kHz) and full Dante network audio redundancy over Gigabit Ethernet.

General Specifications

  • Audio channels - 16IN / 16OUT
  • Sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
  • Sample rate pull-up/down - +4.1667, +0.1, -0.1, and - 4.0 %
  • Sample bit-depth - 16, 24 or 32-bit PCM
  • Network - 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
  • Redundancy - Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
  • Daisy chaining - Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
  • HA Remote - Support for HA Remote capable Yamaha products
  • Expandable - Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64x64 audio channels

Compatible Yamaha equipments

  • Digital Mixers - CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
  • Interfaces - RSio64-D
  • Processors - MRX7-D, MTX5-D, DME24N, DME64N
  • Power Amps - TX4n, TX5n, TX6n