Audio Technica ATW-1101/G, System 10 Digital Wireless

Vendor: Audio Technica
Descriptions Audio Technica ATW-1101/G, System 10 Digital Wireless The Audio Technica ATW-1101/G System 10 is a digital wireless solution for your electric guitar or bass rig that includes the ATW-R1100 digital receiver, the Audio...
$299.95
Title

Audio Technica ATW-1101/G, System 10 Digital Wireless

The Audio Technica ATW-1101/G System 10 is a digital wireless solution for your electric guitar or bass rig that includes the ATW-R1100 digital receiver, the Audio Technica ATW-1101/G UniPak pocket transmitter and the AT-GcW guitar cable. Also, Audio Technica ATW-1101/G use a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Audio Technica ATW-1101/G is built for expandibility, you can use up to eight systems simultaneuosly.

Audio Technica ATW-1101/G is designed specially for quick and easy setup for electric guitarist and bassists, it comes with the 36" AT-GcW guitar cable for connecting your guitar or bass to the ATW-T1001 UniPak pocket transmitter. All you need to do is to plug the cable's 1/4" phone plug connector into your guitar, then plug the locking 4-pin connector on the other side into the pocket transmitter. Finally, just use a guitar cable to connect the unbalanced output on the ATW-R1100 digital receiver to your guitar amplifier's input and you are ready to go.

The Audio Technica ATW-1101/G wireless system is engineered to quickly find the best signal possible, utilizing an automatic frequency selection function that chooses open bands for you when you "pair" your transmitter with the receiver. Also designed to combat interference, the Audio Technica ATW-1101/G uses three different diversity techniques. Using frequency diversity, the system sends the wireless signal on two separate channels simultaneously and chooses the one with the clearest signal. Audio Technica ATW-1101/G also transmits the signal across multiple intervals in time in order to fight multipath interference. This is known as time diversity. In addition, Audio Technica ATW-1101/G system also makes use of space diversity, choosing between the receiver's dual antennas depending on which is picking up the best signal integrity.

Audio Technica ATW-1101/G Product Highlights

  • Unbalanced 1/4" output on receiver for connecting to guitar amp
  • Balanced XLR output on receiver allows for connection to microphone level inputs on mixers
  • Level controls on transmitter and receiver
  • Pair indicator illuminates on receiver when synced with transmitter
  • AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping
System Specifications
Operating Frequencies  2.4 GHz ISM band
Dynamic Range  >109 dB (A-weighted), typical
Total Harmonic Distortion  <0.05% typical
Operating Range  30 m (100') typical
Operating Temperature Range  0 to +40° C (32 to 104° F)
Frequency Response  20 Hz to 20 kHz
Audio Sampling  24 bit, 48 kHz
Receiver  
Receiving System  Diversity (frequency/time/space)
Output Connections  1x XLR, balanced
 1x 1/4" (6.3 mm), unbalanced
Maximum Output Level  Balanced: 0 dBV
 Unbalanced: +6 dBV
Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive,   switched mode external power supply
Dimensions  7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm)
Weight  10.2 oz (290 g)
Transmitter
RF Output Power  10 mW
Spurious Emission  Following federal and national regulations
Input Connections  1x 4-pin locking connector
 
 Wiring:
 Pin 1: GND
 Pin 2: INST INPUT
 Pin 3: MIC INPUT
 Pin 4: DC BIAS +9V
Batteries  2x 1.5V AA (not included)
Battery Life  >7 hours (alkaline)
Dimensions  2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm)
Weight  3.5 oz (100 g), without batteries
Cable
Type  1/4" TS Phone to 4-pin Connector
Length  36" (0.9 m)