Bose ControlSpace EX-4ML Dante Endpoint

Bose ControlSpace EX-4ML Dante Endpoint

Bose ControlSpace EX-4ML Dante Endpoint is being optimized for use with the EX-1280C, and the convenient EX-4ML Dante™ endpoint, is also a cost effective solution for connecting up to 4 conferencing microphones over a single cat-5/6 cable. It can be also used under a conference table, standalone in a rack, or daisy-chained with other endpoints or EX, the EX-4ML adds 4 high-quality line/ microphone inputs, 8 GPO, and 4 GPI, to your networked audio system. Auto-routing, autodiscovery, drag and drop programming and simplified logic control in ControlSpace Designer make configuring the EX-4ML easy. Tasks such as microphone mute actions and configuring microphone LED status are greatly simplified within ControlSpace Designer without even the need to external control system programming.

Key Features

• One-cable-from-the table connectivity supports PoE+, Dante™ audio
networking, logic I/O and LED power to maximize ease of integration
• Broad conference microphone compatibility with 4 high-quality
mic/line input channels, each featuring 48V phantom power, 12V
LED power, 1 logic input and 2 logic outputs for interfacing with
microphone pushbuttons and indicators
• Dante™ audio networking for connection to other Dante-enabled
products over Ethernet-based networks
• Dual network and power connectors allow daisy-chaining of multiple
EX endpoints
• Rotatable mounting tabs allow for multiple mounting options
• Low-profile aluminum enclosure with integrated LED indicators for
unobtrusive under-table mounting
• Simplified software configuration via ControlSpace Designer
software. Supports autodiscovery, auto-routing, and logic presets for
microphone LEDs and pushbuttons
• Optional installation accessories include a magnetic mounting plate
for single-handed under-table mounting, a microphone extension
cable, and a 60 W power supply
• Power and signal indicators

Technical Specifications

AUDIO INPUTS
Input Channels Four (4) analog, balanced microphone/line level
Connectors Four (4) 3.81 mm detachable Euroblock connectors, 7-pin
Phantom Power +48VDC, software selectable per input
Control GPIO 2 logic outputs (100mA low, 8V open, 10mA @ 2.5V high),
1 logic input (0 to 5V, threshold = 1.6V, 2K pull-up to 5V)
Gain Settings 0 / +15 / +30 / +45 dB, software selectable
Input Impedance > 1.8 kΩ at any gain setting
Equivalent Input Noise –115 dBu (+45 dB gain)
Maximum Input Level +20 dBu (using -12 dB gain setting)
System THD < 0.01 % at any gain setting, input signal 3 dB below maximum
Frequency Response 20 Hz — 20 kHz, ± 1 dB

NETWORK
Connectors Two (2) RJ-45, one front (supports PoE+), one rear
Audio Over IP Dante™ Ultimo X4

POWER
Microphone LED power 12 VDC, 200 mA
PoE Class Class 0 802.3at PoE+ PD compliant
Connectors (2) 3.81 mm Euroblock connector, 2-pin
External Power Supply 12 VDC, daisy-chainable
Power Consumption 4.3 watts plus 1 watt for Phantom Power if used