Clear-Com ARCADIA-X4-64P Arcadia Central Station: (64) Licensed Ports, 1RU with HelixNet, 4-wire, 2-wire with Power Supply, Dante, 4 pin XLR-Male headset

Clear-Com ARCADIA-X4-64P Arcadia Central Station: (64) Licensed Ports, 1RU with HelixNet, 4-wire, 2-wire with Power Supply, Dante, 4 pins XLR-Male headset

 The Arcadia X4 64P system consists of an Arcadia Central Station and one 4-pin XLR female headset. The Central Station is designed to support up to 32 FreeSpeak II or FreeSpeak Edge beltpacks, 16 IPT transceivers, and up to 10 E1 transceivers, providing a total of 64 ports of connectivity. This system is specifically engineered to seamlessly integrate analog wired and digital wireless party-line systems, including the entire range of FreeSpeak products. The Central Station is compatible with both wired and wireless endpoints, as well as third-party Dante-enabled audio devices. It ensures the transmission of high-quality 12kHz audio from a single standard 1RU device. Featuring two large high-resolution TFT color touch screens and four rotary encoders, the system enables effortless navigation through menus and pages, facilitating real-time changes and adjustments. Clear-Com's integrated Core Configuration Manager simplifies the setup process with its user-friendly interface, ensuring a quick and trouble-free configuration experience.

FEATURES

• Supports up to 32 beltpacks (FSII and/or FSE), 16 IPT transceivers (FSII and/or FSE) and up to 10 E1 transceivers (1.9 or 2.4GHz)
• Supports up to 100 channels
• 64 ports of connectivity
• Standard 1 rack unit (RU) device
• High-quality 12kHz audio to FS Edge beltpacks
• 2 large full-color touch screen TFT displays
• 4 rotary encoders for gain and menu operation
• Headset or Microphone and Speaker connection
• Stage Announce and Prog. Audio cable
• Functions as PTP Leader Clock
• Wireless 5GHz Edge transceivers and beltpacks
• Wireless 1.9GHz and 2.4GHz FSII splitters, transceivers and beltpacks
• Dante enabled audio devices

• Capacity
  • Beltpacks per Base Station: 32 BPs (FSII or FSE)
  • Transceivers/Antennas Supported by Base: 16 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4GHz)
• Gooseneck Microphone Input
  • Input Type: Dynamic/Electret – Selectable
  • Frequency Response: Gooseneck Mic – Partyline: 200Hz – 12kHz + 3dBu
  • Frequency Response: Gooseneck Mic – Line Out: 200Hz – 20kHz + 3dBu
  • Mic Limiter Threshold: -35dBu ±3dB
  • Mic Limiter Range: ≥ 20dB
  • Max Input Level: -10dBu
  • Input Level: -45dBu nominal; -10dBu MAX
  • Headset Mic Voltage: 5V (Electret selectable)
• Speaker Output
  • Speaker Type: 1.6 x 2.8in oval
  • Load Impedance: 4Ω
  • Max Output Level before 1% Distortion: 18dBu ± 2dB
  • Total Harmonic Distortion (THD): < 0.5% THD at 1kHz
  • Max Speaker Level: 87dB ± 2dB SPL A Weighted at 3ft
  • Frequency Response: 100Hz – 10kHz ± 9dB
• Audio/Radio
  • 4-wire I/O: Output Impedance >10kΩ, Input Impedance 200Ω + 10%, transformer isolated balanced input and output.
  • 4-wire Operating Levels: 0dBu Nominal, 18dBu headroom
  • 2-wire I/O: Selectable RTS or Clear-Com mode, Software controlled auto-null, null depth >60dB at 1kHz
  • 2-wire Operating Levels: -18dBu nominal (Clear-Com Mode), -12dBu nominal (RTS Mode), Headroom 18dB
  • Frequency Response Base-to-Beltpack:
  • Freespeak Edge Beltpack: 200Hz – 12kHz,
  • Freespeak II Beltpack: 200Hz – 7.1kHz
• Partyline I/O
  • 2W Power On/Off: A/B, C/D paired- software controlled
  • 2W Output Voltage: 25 – 28V DC, 560 mA per pair (A/B or C/D)
  • 2W Impedance: >10kΩ
  • 2W Frequency Response: 200 to 12kHz. ±3dB
  • 2W Total Harmonic Distortion (THD): < 0.1% THD at 1 kHz
• Relay Contacts or GPIO
  • Connector Type: 2 x DB9
  • Relay Contact Type: SPDT
  • Relay Quantity: 4
  • Relay Contact Voltage Rating: 30V DC
  • Relay Contact Current Rating: 1A
  • Input Type: Opto-Isolated
  • Input Quantity: 2
  • Input Voltage Range: 4 – 30 volts DC or AC
  • Input Current: >=1.2mA required
• Connectors
  • 4-wire I/O: (8) RJ45
  • 2-wire I/O: (4) XLR-3F
  • Program Input: XLR-3M, provided using cable assembly CAB-RJ45-PGM-SA
  • Stage Announce Output: XLR-3F, provided using cable assembly CAB-RJ45-PGM-SA
  • Headset: Freespeak Edge Base: 4-pin XLR-M, auto headset detect
  • USB: USB type A Receptacle
  • Number of E1 antenna ports: 2 x RJ45, 2 x Fiber (2 active at any time)
  • DECT Radio frequency sync: Rear RJ45 input and output RF sync connectors
• Indicators and Function
  • Displays: (2) 480 x 128 color TFT LED Touch Screen displays
  • Front Panel Indicators & Function:
  • (2) Power Supply Status LEDs
  • (1) Status LED (Edge)
  • (1) Three Color Level Control LED Array
• Power:
  • AC Mains input: 100-240V AC, 50-60Hz, 160W Max, IEC60320 C14 inlet.
  • DC Low Voltage Input: 12V DC +/- 5%, 12A
  • External AC/DC Power Supply (453G020-1 Supplied):
  • Input: 100-240V AC, 50-60Hz, 2.2A Max, IEC60320 C14 inlet.
  • Output: 12V DC +/- 5%, 12.5A
• Environmental
  • Operating: 32° to 113°F (0° to 45°C)
  • Storage: 86° to 158°F (30° to 70°C)
  • Humidity: 20-90% Non-Condensing
  • Dimensions (WxHxL): 19.00" x 1.72" x 13.93" (43.6 x 482.6 x 353.8mm)
  • Depth: 260mm
  • Weight: 7.25lbs (3.29kg)
• Network Specifications
  • AoIP Interfaces
  • Protocols:
    • RTSP/SAP
    • AES67
    • Dante
  • Audio Sampling: 24 bit Linear 48KHz
  • IP Addressing: Static, DHCP
  • Network Compatibility: Layer 2 & 3 LAN only
  • Quality of Service: DiffServ RFC2474
  • IGMP: On (AoIP)
  • Multicast: On (AoIP)
  • Network Timing: PTPv2 (AoIP) / PTP v1 (Dante)
  • Minimum Network Bandwidth Required
  • Perduplex Connection:
  • 1 x FS II IPT bandwidth usage: ~7 Mbps.
  • 1 x FS Edge IPT: ~ 9.6 Mbps
• Network Protocols
  • Ethernet IPv4 Unicast Audio and Control
  • mDNS–Multicast Device Discovery
  • Network Ports
  • Unicast:
  • Port 80 TCP–Web Interface, System Management, Expansion
  • Port 443 for HTTPS
  • Port 6001 UDP–AES67 Data
  • Port 15000 – 15256 UDP – AES67 Audio
  • Multicast: Port 5353 UDP–mDNS, Names, Discovery, Linking, Expansion, Dante (through various ports)
  • Network Jitter Tolerance: < 1us required for RF Syncing of Transceivers
• Recommended Ethernet Switches
  • Managed Ethernet Switch – Layer 3
  • 100/1000 Base-T ports for endpoints
  • 1000 Base IP Trunks between switches
  • QoS Configuration
  • Energy Efficient Ethernet bypass option
  • IGMP Snooping bypass option