Crown CT8150 Crown ComTech DriveCore CT8150, Eight channel, 125W @ 4/8Ω Power Amp
Vendor: Crown
Description Crown CT8150 Crown ComTech DriveCore CT8150, Eight channel, 125W @ 4/8Ω Power Amp The Crown CT8150, is the pioneering technology of DriveCore™ and as they are powering this remarkable amplifier it is...
Available
Crown CT8150 Crown ComTech DriveCore CT8150, Eight channel, 125W @ 4/8Ω Power Amp
The Crown CT8150, is the pioneering technology of DriveCore™ and as they are powering this remarkable amplifier it is also designed for the integration of the amplifier drive stage into the power output stage as it combining everything into a chip the size of a dime. With DriveCore's front-end drive circuits enhance the inherent efficiency of Class D output stages and at the same time it maintains superb sonic characteristics. The end result is the Crown CT8150 an audio amplifier circuit capable of exhibiting the exemplary audio quality of a highly evolved Class AB design.
Features
- Flexible Input Routing
- Convection Cooled
- Universal Power Supply
- Integrated Life-Safety Features
- Up to 8X125W in 1U chassis with no fan
- DriveCore™ technology provides >90% efficiency with no compromise in performance
- Patented Feedback and Protection Circuits
- Amplifier is stable for 2 – 16 Ohm Loads
- XFMR 4/8 needed for 70V/100V Applications
Channels | 8 |
Sensitivity | 1.4 V |
Rated Power Output (all channels driven) | 125W per CH @ 4 ohms, 125W per CH @ 8 ohms |
Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | 110 dB |
THD (full rated power, 20 Hz - 20 kHz) | < 0.05% |
Intermodulation Distortion (from 0 dB down to -30 dB) | < 0.05% |
Frequency Response (at 1W, 4/8 ohms) | +/- 0.5 dB |
Crosstalk (below rated power) 20 Hz to 1 kHz | > 70 dB |
Common Mode Rejection (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB |
Voltage Gain | 27 dB |
DC Offset | +/- 20mV |
Idle Power Consumption (Standard Mode) | 25.5W |
Dimensions | 1.75" x 19" x 15.19" |
Weight | 10lbs/4.54kg |
Shipping Weight | 15 lbs/6.8 kg |
IEC Power Connector | 15A |
Related Product
Prev
Next
Dynacord SR20TGX-US, Amplifier system rack 3x TGX20-US
Dynacord SR20TGX-US, Amplifier system rack 3x TGX20-US The Dynacord SR20TGX-US System Rack is a modular solution designed and built for...
$41,310.00
Dynacord TGX20, DSP power amplifier 4 x 5000w, live
Dynacord TGX20, DSP power amplifier 4 x 5000w, live Dynacord TGX20 introduces one of the most powerful 4-channel sound amplifiers...
$12,230.00
Dynacord PCO32A30-US, Powercord, powerCon 32 to NEMA L5-30 mains connector, 2m
Dynacord PCO32A30-US, Powercord, powerCon 32 to NEMA L5-30 mains connector, 2m Power cord for powercon 32 to NEMA L6-30 mains...
$117.00
Dynacord IPX20:4, 4 x 5000 w multi‑channel installation DSP class‑d amplifier
Dynacord IPX20:4, 4 x 5000 w multi‑channel installation DSP class‑d amplifier Dynacord IPX20:4 series are dedicated amplifiers for fixed install...
$10,190.00
Dynacord IPX10:8, 8 x 1250 w multi‑channel installation DSP class‑d amplifier
Dynacord IPX10:8, 8 x 1250 w multi‑channel installation DSP class‑d amplifier Dynacord IPX10:8 series are dedicated amplifiers for fixed install...
$8,231.00
Dynacord IPX10:4, 4 x 2500 w multi‑channel installation DSP class‑d amplifier
Dynacord IPX10:4, 4 x 2500 w multi‑channel installation DSP class‑d amplifier Dynacord IPX10:4 series are dedicated amplifiers for fixed install...
$7,201.00
Dynacord IPX5:4, 4 x 1250 w multi‑channel installation DSP class‑d amplifier
Dynacord IPX5:4, 4 x 1250 w multi‑channel installation DSP class‑d amplifier Dynacord IPX5:4 series are dedicated amplifiers for fixed install...
$5,656.00
Dynacord C3600FDI-US, DSP 2 x 1800 w power amplifier for fixed install applications
Dynacord C3600FDI-US, DSP 2 x 1800 w power amplifier for fixed install applications Dynacord C Series amplifiers are dedicated installation...
$1,859.00
Dynacord C2800FDI-US, DSP 2 x 1400 w power amplifier for fixed install applications
Dynacord C2800FDI-US, DSP 2 x 1400 w power amplifier for fixed install applications Dynacord C2800FDI-US C Series amplifiers are dedicated...
$1,549.00
Dynacord C1800FDI-US, DSP 2 x 950 w power amplifier for fixed install applications
Dynacord C1800FDI-US, DSP 2 x 950 w power amplifier for fixed install applications Dynacord C1800FDI-US C Series amplifiers are dedicated...
$1,229.00
Dynacord C1300FDI-US, DSP 2 x 650 w power amplifier for fixed install applications
Dynacord C1300FDI-US, DSP 2 x 650 w power amplifier for fixed install applications Dynacord C1300FDI-US C Series amplifiers are dedicated...
$969.00
Dynacord DC-RMK15, Rear Rackmount Kit for L Series
Dynacord DC-RMK15, Rear Rackmount Kit for L Series
Rackmount kit for Dynacord L Series
"SPECIFICATION NOT SPECIFIED BY THE MANUFACTURER"
$73.20
Dynacord L3600FD-US, DSP 2 x 1800 w power amplifier for live performance applications
Dynacord L3600FD-US, DSP 2 x 1800 w power amplifier for live performance applications Dynacord L3600FD-US Series are professional dual-channel audio...
$1,699.00
Dynacord L2800FD-US, DSP 2 x 1400 w power amplifier for live performance applications
Dynacord L2800FD-US, DSP 2 x 1400 w power amplifier for live performance applications Dynacord L2800FD-US Series are professional dual-channel audio...
$1,419.00
Dynacord L1800FD-US, DSP 2 x 950 w power amplifier for live performance applications
Dynacord L1800FD-US, DSP 2 x 950 w power amplifier for live performance applications Dynacord L1800FD-US Series are professional dual-channel audio...
$1,119.00
Dynacord L1300FD-US, DSP power amplifier 2x650W. With FIR drive, XLR/NL4 connectors.
Dynacord L1300FD-US, DSP power amplifier 2x650W. With FIR drive, XLR/NL4 connectors. Dynacord L1300FD-US is one of the L Series and a professional...
$889.00