Crown XLC2500 2x500W Cinema Amplifier w/o DSP

Name: Crown XLC2500 2x500W Cinema Amplifier w/o DSP
Brand: Crown
SKU: XLC2500
Price: 775.89 USD
Availability: InStock

Vendor: Crown

Description Crown XLC2500 2x500W Cinema Amplifier w/o DSP The Crown XLC2500 is a Two-channel, 500W @ 4Ω Power Amplifier designed to incorporate the proprietary DriveCore™ Technology by Crown, which is capable of reducing the amplifiers’ size...

$775.89

Default Title

Subtotal:

Quantity

Description

Crown XLC2500 2x500W Cinema Amplifier w/o DSP

The Crown XLC2500 is a Two-channel, 500W @ 4Ω Power Amplifier designed to incorporate the proprietary DriveCore™ Technology by Crown, which is capable of reducing the amplifiers’ size significantly, and at the same time to yield much more energy efficient operation, yet not affecting its performance. The XLC2500 is designed as a cost-effective, compact, and powerful to provide ease of installation, unwavering reliability and outstanding sound quality inherent in every Crown product. This amplifier is affordable, yet powerful options for both the install and cinema markets.

Power Matrix

Features

Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
Support parallel connection of cinema surround speaker
Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
Volume control on rear panel of amplifiers
High performance, light weight
DriveCore based amplifier – weighs less than 14lbs (6 kgs)

Some important features for install applications:

Minimal front panel control; block connectors and controls on back of amplifiers
High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability
Configurable input operation for stereo and parallel and bridge modes
Configurable output operation for stereo and bridge modes

Specifications

AC Line Voltage and Frequency Configurations Available	(+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz
Voltage Gain	35
Sensitivity	1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio	(ref. rated power, 8 ohms, 1 kHz) > 103 dB
THD	<0.5%
Damping Factor	(8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion	(from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz - 20 kHz)	0 dB
Crosstalk	>85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal)	20 kilohms balanced, 10 kilohms unbalanced
Load Impedance	2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions	19" x 3.5" x 8" (48.3cm x 8.9cm x 20.6cm)
Weight	8.3 lbs (3.75 kg)
Shipping Weight	10.7 lbs (4.85 kg)
IEC Power Connector	15A