DBX 6x4 Digital Zone Processor 641

Vendor: DBX
DBX 6x4 Digital Zone Processor 641 The ZonePRO 641m 6x4 Digital Zone Processor designed by DBX can distribute up to 6-audio sources across 4 mono output zones. The included software will permit you to...
$499.00 $624.58
Title

DBX 6x4 Digital Zone Processor 641

The ZonePRO 641m 6x4 Digital Zone Processor designed by DBX can distribute up to 6-audio sources across 4 mono output zones. The included software will permit you to adapt the input/outputs quickly to fit your requirements. The DBX ZonePRO 641m will be at its best in an environment with separate rooms with differing sound needs, like a bar/restaurant.

The ZonePRO 641m's pre-configured architecture keeps the input/output addresses fixed and simple. It has 4-balanced Euroblock mic/line inputs with gain control, and two unbalanced, mono-summed RCA input pairs. Its 4-zones output from balanced, line-level Euroblock connectors.

Once after connecting the analog cables, your audio system can be controlled and fine-tuned in the ZonePRO Designer software from your Windows-based PC. The output zones all have individual tone controls, including AutoWarmth and one DSP insert, for optimally tuning the speaker system to the room. For making the most of each source, the ZonePRO 641m also has independent EQ and two selectable DSP inserts for each of the 6 inputs.

Dbx ZONEPRO 641M Specs

  • Inputs: Euroblock mic/line x4
    Unbalanced, mono-summed RCA input pairs x2
  • Phantom Power: +15VDC
  • Input Impedance: Euroblock:
    >50kΩ balanced
    >25kΩ unbalanced
    RCA:
    >25kΩ unbalanced
  • Maximum Input Level: +20dBu mic/line, +12dBu RCA
  • CMRR: > 40dB, typically >55db @ 1kHz
  • Mic Pre Gain: 30 to 60dB
  • Mic Input Noise (E.I.N.): < -118dBu, 22Hz-22kHz, 150Ω source impedance
  • Outputs: Balanced, RF filtered Euroblock x4
  • Output Impedance: 120Ω balanced
    60Ω unbalanced
  • Maximum Output Level: +20dBu
  • A/D Conversion: DBX Type IV Conversion System
    Dynamic range line:
    >113dB, A-weighted, >110dB unweighted
    Type IV dynamic range:
    >119dB, A-weighted, 22kHz BW
    >117dB, unweighted, 22kHz BW
  • Sample Rate: 48kHz
  • D/A Conversion: Dynamic range:
    112dB A-weighted, 109dB unweighted, 22kHz BW
  • DSP Effects: Available on Input Inserts:
    Automatic gain control
    Notch filter
    Compressor
    Gate
    De-esser
    Advanced feedback suppression
    Available on Output Inserts:

    Automatic gain control
    Ambient noise compensation
    AutoWarmth
    Compressor
    Limiter
  • Dynamic Range: >109dB A-weighted
    >106dB unweighted
  • THD + N: 0.003% typical at +4dBu, 1kHz, 0dB gain
  • Frequency Response: 20 - 20,000 Hz, +/- 0.5dB
  • Crosstalk: Interchannel: >80dB typical
    Input to output: >80dB
  • Propagation Delay: 0.6 msec
  • Computer Connectivity: Ethernet RJ45 x1
    RS-232 serial port x2
    (not to be used at once)
  • Operating Systems Supported: Windows 2000/XP/Vista/7
    No 64-bit support
  • Remote Control Input: RJ-45 x2
    Up to 6 ZC-series remotes can be connected to each input
    Wired in series: supports total distance of 300 ft (91.4 m) of CAT 5 cable
    Wired in parallel using ZC-BOB: up to 1,000 ft (304.8 m) each
  • Operating Voltage: 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
  • Power Consumption: 29 watts
  • BTU: <92.13
  • Dimension (D x W x H): 1U rackmount: 7.75" x 19" x 1.75" (19.69 x 48.26 x 4.45 cm)
  • Weight: 6.8 lbs (3.1 kg)

Packaging Info

  • Package Weight: 7.9 lb
  • Box Dimensions (LxWxH): 22.35 x 22 x 3.75"