DiGiCo SD-RE Rack, Redundant engine for a DiGiCo SD10 console

DiGiCo SD-RE Rack, Redundant engine for a DiGiCo SD10 console

The DiGiCo SD-RE Rack is a fully redundant engine for a DiGiCo SD10 console, providing exactly the same type of redundancy option for an SD10 that is standard on our flagship, dual-engine SD7 consoles. By simply connecting the compact, 3U box to the console with an Ethernet crossover cable and the system’s audio racks using MADI or Optocore, the SD RE provides a seamless backup for the console. The SD10 console’s control computer, audio engine, software application, and important worksurface controls can all be duplicated on the SD-RE redundant system, with the DiGiCo engine mirroring setup offering either automatic or manual switchover whenever it’s required. The DiGiCo SD-RE Rack supports a 12-fader remote worksurface and a screen, keyboard, and mouse for full control in any situation. For full audio specifications, please refer to the SD10.

DiGiCo SD-RE Rack MAIN FEATURES

• Redundant engine for an SD10 console
• 144 Input Channels with full processing
• 64 Aux/Sub-Group busses with full processing
• 24 x 24 Matrix with full processing
• Redundant PSUs as standard
• Theatre software option
• Broadcast software option
• 3U Rackmount unit
• Remote Fader for external control over levels and snapshot firing

WORKSURFACE

• 1 x USB 2.0 slot

REAR

• 2 x Redundant PSUs
• 1 x SD Remote Fader port
• 1 x PS/2 Keyboard port
• 1 x PS/2 Mouse Port
• 1 x Waves port (Optional)
• 1 x GPI DSub37 (16 inputs)
• 1 x GPO DSub37 (16 outputs)
• 1 x MIDI In/Thru/Out (5 pin DIN)
• 1 x Word Clock I/O BNC
• 2 x Redundant MADI BNC I/O
• 1 x VGA Port - DB-15 Mini-Female (1024 x 768 Resolution)
• 1 x Ethernet port
• 2 x USB 2.0 slots
• 1 x MultiMode Optocore Interface as standard
• 1 x XLR AES Sync I/O

AUDIO SPECIFICATIONS

• Sample Rate: 48kHz or 96kHz
• Processing Delay: 2ms Typical @ 48K (48 Stereo Channels,
• Stage input Through L-R Buss to Stage Output) 1.1ms @96k
• Internal Processing: Up to 40-bit, Floating Point

OPTIONS

• Waves SoundGrid Interface
• Optocore Interface (HMA, OpticalCon, or ST connectivity)
• Upgrade to SingleMode Optocore
• Theatre Software
• Broadcast Software

SIGNAL PROCESSING

144 Input Channels (Mono)

• Main & Alternative input
• Analogue Gain
• Phase Inversion Control • Gain Tracking
• Digital Trim (-40dB to +40dB)
• Variable Delay (0ms to 1.3s)
• DiGiTube
• HPF/LPF (-24dB/Oct)
• 4 Band Parametric EQ / Dynamic EQ
• DYN 1: Compressor, Multiband Compressor, Desser
• DYN 2: Gate, Duck, External Input Compressor
• EQ/Dyn Order Contro
• 2 Insert Points per Channel
• Channel Mute & Hard Mute
• Channel Direct Outputs

64 Aux/Sub-Group Busses

• Phase Inversion Control
• Digital Trim (-40dB to +40dB)
• Variable Delay (0ms to 1.3s)
• DiGiTube
• Merge Input
• Tone Generator
• HPF/LPF (-24dB/Oct)
• 8 Band EQ: 4 Band Parametric EQ and 4 Band
• Parametric or Dynamic EQ
• DYN 1: Compressor, Multiband Compressor, Desser
• DYN 2: Gate, Duck, External Input Compressor
• EQ/Dyn Order Control
• 2 Insert Points per Channel
• Channel Mute & Hard Mute

1 LR/LCR/LCRS/5.1 Master Buss (with full processing)
24 input x 24 output Full Processing Matrix
24 Control Groups (CGs)
2 Solo Busses
24 x 32-band GEQs

24 x Internal Stereo FX Processors

• Delays
• Audio Enhancer
• Choruses
• Pitch Shifters
• Reverbs

DiGiTubes available on every channel and Buss
Dynamic EQs available on every channel and Buss
Multiband Compressors available on every channel & Buss
Virtual Soundcheck

PHYSICAL

SD-RE

• Dimensions: 483mm (w) x 462.5mm (d) x 132.5mm (h)
• Weight: 10.15kg
• Power Requirements: 90-264 VAC, 47-63Hz. 230 VAC max. 0.75A max.
• Redundancy: Internal PSU x 2

Remote Fader

• Dimensions: 476.8mm (w) x 346.4mm (d) x 109.5mm (h)
• Weight: 4.9 kg
• Power Requirements: 100-240 VAC, 0.8A, 50/60Hz
• Product Code: X-SD-RE-OPTO (HMA optics)