Draper 101060FNQU Premier, 106", HDTV, Pure White XT1300V, 110 V, with Quiet Motor & LVC-IV Low Voltage Controller

Draper 101060FNQU Premier, 106", HDTV, Pure White XT1300V, 110 V, with Quiet Motor & LVC-IV Low Voltage Controller

The color black, 120V Draper 101060FNQU is a Premier 52 x 92" Motorized Screen with LVC-IV Low Voltage Controller and Quiet Motor that is designed for wall or ceiling mounted installation. The Draper 101060FNQU features Draper's Tab-Tensioning System to hold the surface taut and keep it wrinkle-free. The projected image is framed by black masking borders at all sides for enhanced contrast. Also, the Draper 101060FNQU uses a motor-in-roller system, which is mounted on special vibration insulators, so the screen operates smoothly and silently. Draper Pure White offers a 30% boost in brightness over a traditional matte white surface while still maintaining 180° viewing (90° half angle). Color does not shift when viewed from any angle, and the surface provides very good white field uniformity. The motor is mounted inside the roller on special vibration insulators. The LVC-IV low voltage control is used to control the screen's motor using a third-party system in a variety of ways: with a low voltage wall switch, "dry" contact closure, RF (radio frequency), IR (infrared), serial communication (such as RS-232), or low voltage relay (3-28V). It works with the separately available LVC-S, WRT, IRT/R, SP-KSM, and KS-1 Power Supply Switch. The LVC-IV is housed in a single box, features three compartments, and is UL Listed. The module contains a 3-screw terminal block for a low voltage wall switch, an IR receiver jack, a built-in RF receiver, two-RJ25 ports for RS232/RS485, a low voltage relay port with cable, and a user-serviceable 3.5A fuse. Produces less noise when the screen is lowered or raised. Ideal for boardrooms, lecture halls, or other settings where the screen may need to raised or lowered during the event.

Draper 101060FNQU Main Features

• 106" Diagonal / 16:9 Aspect Ratio
• Pure White XT1300V Surface
• 1.3 Gain / 180° Viewing Cone
• Motor-In-Roller Design
• Tab-Tensioned for Flat Viewing Surface