Draper 101636SCL Premier, 76", 16:10, ClearSound NanoPerf XT1000V, 110 V, with Low Voltage Controller

Draper 101636SCL Premier, 76", 16:10, ClearSound NanoPerf XT1000V, 110 V, with Low Voltage Controller

The color black Draper 101636SCL is a 120V Premier 40 x 64" Motorized Screen with Quiet Motor that is designed for wall or ceiling mounted installation. The Draper 101636SCL also features Draper's Tab-Tensioning System to hold the surface taut and keep it wrinkle-free. The projected image is framed by color black masking borders at all sides for enhanced contrast. It uses a motor-in-roller system, which is mounted on special vibration insulators, so the screen operates smoothly and quietly.

Microscopic perforations in the fabric create an acoustically transparent surface that does not compromise audio quality when speakers are placed behind the screen. The projected image has a full 180° viewing cone and accurate color reproduction. Black backing on the other side of the viewing surface helps prevent light penetration from behind the screen. Ideal for home theater; not recommended for viewing less than 10' from the screen. The motor is mounted inside the roller on special vibration insulators. Produces less noise when the screen is lowered or raised. Ideal for boardrooms, lecture halls, or other settings where the screen may need to raised or lowered during the event

Draper 101636SCL MAIN FEATURES

• Case dimensions: 5-7/8" high x 5-1/4" deep (15 cm x 13 cm). Optional built-in controls and extra drop may increase case length. Steel case with baked-on black plastisol finish (standard), white available upon request. Includes matching endcaps with universal mounting brackets.
• Maximum image width up to 12’ (366 cm) wide, depending on surface selection.
• For larger sizes, the Premier XL is functionally similar to the Premier and is available in sizes through 16’ (488 cm) wide.
• Image area fully framed with black. Standard 12" (30 cm) black drop at top of the viewing area.
• Optional white aluminum ceiling trim kit available for recessed installation. Additional 12" blacktop drop recommended for ceiling-recessed installation.
• Optional wall- or ceiling-mounting brackets for added flexibility.
• Rear projection surfaces available.
• Optional Plug & Play with built-in low-voltage controller (LP) or with built-in quiet, low-voltage controller (QLP). Screens over 119" diagonal on 16:9 format on this screen cannot use QLP.
• Includes one 110-120V, 3-position switch (standard). Other control options are available.
• Custom sizes available.