Draper 101638SCQU Premier, 94", 16:10, ClearSound NanoPerf XT1000V, 110 V, with Quiet Motor & LVC-IV Low Voltage Controller

Vendor: Draper
Draper 101638SCQU Premier, 94", 16:10, ClearSound NanoPerf XT1000V, 110 V, with Quiet Motor & LVC-IV Low Voltage Controller The color black, 120V Draper 101638SCQU Premier 50 x 80" Motorized Screen with LVC-IV Low Voltage...
$2,929.00 $3,660.73
Title

Draper 101638SCQU Premier, 94", 16:10, ClearSound NanoPerf XT1000V, 110 V, with Quiet Motor & LVC-IV Low Voltage Controller

The color black, 120V Draper 101638SCQU Premier 50 x 80" Motorized Screen with LVC-IV Low Voltage Controller and Quiet Motor which is designed for wall or ceiling mounted installation. It features Draper's Tab-Tensioning System to hold the surface taut and keep it wrinkle-free. The projected image is framed by black masking borders at all sides for enhanced contrast. It uses a motor-in-roller system, which is mounted on special vibration insulators, so the screen operates smoothly and silently. Microscopic perforations in the fabric create an acoustically transparent surface that does not compromise audio quality when speakers are placed behind the screen. The projected image has a full 180° viewing cone and accurate color reproduction. Black backing on the other side of the viewing surface helps prevent light penetration from behind the screen. Ideal for home theater; not recommended for viewing less than 10' from the screen. The motor is mounted inside the roller on special vibration insulators. The LVC-IV low voltage control is used to control the screen's motor using a third-party system in a variety of ways: with a low voltage wall switch, "dry" contact closure, RF (radio frequency), IR (infrared), serial communication (such as RS-232), or low voltage relay (3-28V). It works with the separately available LVC-S, WRT, IRT/R, SP-KSM, and KS-1 Power Supply Switch. The LVC-IV is housed in a single box, features three compartments, and is UL Listed. The module contains a 3-screw terminal block for a low voltage wall switch, an IR receiver jack, a built-in RF receiver, two-RJ25 ports for RS232/RS485, a low voltage relay port with cable, and a user-serviceable 3.5A fuse. Produces less noise when the screen is lowered or raised. Ideal for boardrooms, lecture halls, or other settings where the screen may need to raised or lowered during the event.

Draper 101638SCQU MAIN FEATURES

  • Case dimensions: 5-7/8" high x 5-1/4" deep (15 cm x 13 cm). Optional built-in controls and extra drop may increase case length. Steel case with baked-on black plastisol finish (standard), white available upon request. Includes matching endcaps with universal mounting brackets.
  • Maximum image width up to 12’ (366 cm) wide, depending on surface selection.
  • For larger sizes, the Premier XL is functionally similar to the Premier and is available in sizes through 16’ (488 cm) wide.
  • Image area fully framed with black. Standard 12" (30 cm) black drop at top of the viewing area.
  • Optional white aluminum ceiling trim kit available for recessed installation. Additional 12" blacktop drop recommended for ceiling-recessed installation.
  • Optional wall- or ceiling-mounting brackets for added flexibility.
  • Rear projection surfaces available.
  • Optional Plug & Play with built-in low-voltage controller (LP) or with built-in quiet, low-voltage controller (QLP). Screens over 119" diagonal on 16:9 format on this screen cannot use QLP.
  • Includes one 110-120V, 3-position switch (standard). Other control options are available.
  • Custom sizes available.

Part number: 101638SCQU
Surface material: ClearSound NanoPerf XT1000V
Image Format: 16:10
Diagonal size: 94"
Image/Viewable area: 50" x 80"
Case length: 99"
Product weight: 50 pounds
Shipping weight: 74 pounds