Draper 101761U Premier, 100", HDTV, Matt White XT1000VB, 110 V, with LVC-IV Low Voltage Controller

Draper 101761U Premier, 100", HDTV, Matt White XT1000VB, 110 V, with LVC-IV Low Voltage Controller

The color black Draper 101761U is a 120V Premier 49x87" Motorized Screen with LVC-IV Low Voltage Controller from Draper which is designed for wall or ceiling mounted installation. The Draper 101761U features Draper's Tab-Tensioning System to hold the surface taut and keep it wrinkle-free. The projected image is framed by black masking borders at all sides for enhanced contrast. Also, the Draper 101761U uses a motor-in-roller system, which is mounted on special vibration insulators, so the screen operates smoothly and quietly. Considered the most versatile, a matt white surface diffuses projected light in all directions, so the image can be seen from any angle. In addition, it is designed to provide an accurate color rendition due to its smooth, non-embossed surface. It features unity gain with a panoramic 180° cone, ideal for controlled lighting environments. This surface is GREENGUARD Children and Schools certified. The motor is mounted inside the roller on special vibration insulators. The LVC-IV low voltage control is used to control the screen's motor using a third-party system in a variety of ways: with a low voltage wall switch, "dry" contact closure, RF (radio frequency), IR (infrared), serial communication (such as RS-232), or low voltage relay (3-28V). It works with the separately available LVC-S, WRT, IRT/R, SP-KSM, and KS-1 Power Supply Switch. The LVC-IV is housed in a single box, features three compartments, and is UL Listed. The module contains a 3-screw terminal block for a low voltage wall switch, an IR receiver jack, a built-in RF receiver, two-RJ25 ports for RS232/RS485, a low voltage relay port with cable, and a user-serviceable 3.5A fuse.

Draper 101761U MAIN FEATURES

• Case dimensions: 5-7/8" high x 5-1/4" deep (15 cm x 13 cm). Optional built-in controls and extra drop may increase case length. Steel case with baked-on black plastisol finish (standard), white available upon request. Includes matching endcaps with universal mounting brackets.
• Maximum image width up to 12’ (366 cm) wide, depending on surface selection.
• For larger sizes, the Premier XL is functionally similar to the Premier and is available in sizes through 16’ (488 cm) wide.
• Image area fully framed with black. Standard 12" (30 cm) black drop at top of the viewing area.
• Optional white aluminum ceiling trim kit available for recessed installation. Additional 12" blacktop drop recommended for ceiling-recessed installation.
• Optional wall- or ceiling-mounting brackets for added flexibility.
• Rear projection surfaces available.
• Optional Plug & Play with built-in low-voltage controller (LP) or with built-in quiet, low-voltage controller (QLP). Screens over 119" diagonal on 16:9 format on this screen cannot use QLP.
• Includes one 110-120V, 3-position switch (standard). Other control options are available.
• Custom sizes available.