Electro Voice PXM 12MP 12” powered coaxial monitor, US, black

Vendor: Electro Voice
Description Electro Voice PXM 12MP 12” powered coaxial monitor, US, black The Electro Voice PXM 12MP is professionally Designed for musicians, bands, small venues, and rental houses, the black Electro Voice PXM-12MP 12"...
$799.00 $1,398.00
Title

Electro Voice PXM 12MP 12” powered coaxial monitor, US, black

The Electro Voice PXM 12MP is professionally Designed for musicians, bands, small venues, and rental houses, the black Electro Voice PXM-12MP 12" Powered Coaxial Monitor is built as a compact and versatile monitoring system that is capable to be used as a floor wedge or as a mains PA. It can be placed on the ground,  doing so the floor wedge angles up 55° which is allowing the musicians and performers to hear themselves without blocking sightlines. The enclosure also comes featuring a pole cup, which is intended for allowing it to be mounted to a standard speaker stand and used as fills, delays, or a main PA system. It comes with a dedicated subwoofer, and with it, and the adjustable subwoofer matching LPFs of the PXM-12MP, a full 3-way system is capable to be configured for creating an extremely compact main PA.

The PXM12-MP comes featuring a single knob DSP designed for selecting four 3-band EQ presets along with high- and low-shelving, and parametric mid-range. There is also an adjustable high-pass filter, a tunable feedback notch filter, and recallable user settings. It is truly tuned to be great for stage performers or small events, a built-in 700W Class-D amplifier is intended for providing plenty of power to ensure a powerful clean audio. The specialty coaxial driver places a 1.75" high-frequency driver inside a 12" woofer, this is allowing the the two speakers to effectively function as a single-point source, delivering a precise signal without issue. The 15mm plywood enclosure has a black, powder coated steel grille, great for surviving the rigors of on-the-road wear and tear.

  • Multifunctional monitoring system that is useable as a floor wedge or as a mains PA
  • Acoustically optimized 55° monitor floor angle
  • QuickSmartDSP processing
    • Easy setup via four presets
    • Sub/top system-match
    • 3-band EQ
    • Five user-programmable presets
    • Visual monitoring of limiter status, input level control, and meters
    • Master volume control to optimize gain structure via LCD
  • 700W Class-D power amplifier designed by Dynacord
  • Delivers up to 129 dB peak SPL utilizing transducers by EV
  • System reliability: Verified with over 500 hours of abuse and endurance testing
PA Speaker
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 700 W
Amplifier Power Rating LF:
1 x 500 W
HF:
1 x 200 W
Amplifier Class Class-D
Drivers
HF Driver 1 x 1.75" / 44.45 mm
LF Driver 1 x 12" / 304.8 mm
Performance
Frequency Range 53 Hz to 20 kHz -10 dB
Frequency Response 64 Hz to 20 kHz -3 dB
Maximum SPL 129 dB (Peak)
Coverage Angle 90° H x 90° V
Protections None
Connectivity
Audio I/O 2 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Line/Mic Input
1 x 2RCA Female Unbalanced Line Input
1 x XLR 3-Pin Male Balanced Link Thru
Signal Processing
Crossover 1.6 kHz
EQ 4 x Presets (Factory)
Filters 1 x High-Pass
Dynamic Processing Limiter
Power
AC Input Power Universal:
100 to 240 VAC, 50 / 60 Hz 
AC Power Connector 1 x IEC Input
Current Consumption 0.8 to 0.5 A
Physical
Mounting 1 x Pole Socket
Monitor Angle 55°
Handles 1 x Each Side
Construction Material Plywood, Steel
Dimensions 13.1 x 16.1 x 19" / 332.7 x 408.9 x 482.6 mm
Weight 29.8 lb / 13.5 kg