Electro Voice RE920TX Premium Cardioid Instrument Mic Premium cardioid instrument Microphhone with a custom shock mounting clip and TA4 connector
Vendor: Electro Voice
Available
Electro Voice RE920TX Premium Cardioid Instrument Mic Premium cardioid instrument Microphone with a custom shock mounting clip and TA4 connector
Cardioid Condenser Instrument Microphone with TA4F Connector
The Electro Voice RE920TX is a cardioid condenser instrument mounted microphone that comes with a TA4-female connector, that is designed for use with Electro-Voice and Telex wireless belt-pack transmitters. The Electro Voice RE920TX comes with a sensitivity and frequency response that excels in capturing woodwind and brass instruments. High sound pressure handling is enabling a close positioning with no noise and distortion that might come from signal overload.
The Electro Voice RE920TX comes with a unobtrusive, miniature cardioid capsule that is minimizing off-axis noise and the remaining inconspicuous at the same time. The adjustable gooseneck is enabling an easy, stable positiong and soft nylon clips that are capable of stabilizing the microphone cable, and eliminate noise cause by abrupt movement and vibration. Foam windscreen is included and capable of minimizing the sibilance, wind and popping noise and protecting the element from moisture at the same time.
- TA4-Female Connection for Wireless
The RE-920TX instrument microphone is specifically designed for use with Electro-Voice and Telex wireless body-pack transmitters. - High SPL Capability
High headroom and SPL handling enable close capturing of brass and woodwind instruments without noise due to overload and distortion. - Adjustable Gooseneck
The quiet adjustable gooseneck enables quick and easy capsule positioning. - Cable Stabilization
Nylon clips are provided to stabilize the microphone cable, reducing noise caused by handling the instrument. - Secure Mounting
A rugged, secure mounting clip provides secure microphone mounting to the bells of brass and woodwind instruments. - Cardioid Polar Pattern
The cardioid polar pattern reduces off-axis noise and audio that can cause feed back and unwanted residual noise.
- Transducer: Self-Biased Condenser, Back Electret 2-Micron Thick, Gold Sputtered Diaphragm
- Polar Pattern: Cardioid
- Frequency Response: 80Hz to 18kHz
- Dynamic Range (Typical): > 117dB
- Signal-to-Noise Ratio: 31dB SPL
- Maximum Input Sound Level: 148dB
- Power Requirements: 5 VDC
- Output Impedance: 1kHz, 1000 ohms
- Output Connectors: TA4-Female
- Pad: No
- Low Frequency Roll-Off: No
- Dimensions: .95 x .41" (10.5 x 24.1mm) (Length x Diameter)
- Weight: .81 oz (54 grams) mic only