KANEX PRO EXT-AVIPH264RX NetworkAV H264 Receiver 120M

KANEX PRO EXT-AVIPH264RX NetworkAV H264 Receiver 120M

The KanexPro EXT-AVIPH264RX is a DHCP-enabled AV over IP receiver with HDMI output to display and Ethernet. This receiver over IP uses an advanced H.264 compression algorithm to transmit full HD 1080p from HDMI-based displays with less bandwidth over a LAN network. It supports PoE (Power over Ethernet) with distances over a single CATx up to 394 ft. (120m) delivering one to one, one to many, and many to many over the Ethernet switch.

Please note: Power over Ethernet will be supported only with a PoE-enabled network switch.

Applications: Ideal for digital signage and networked AV applications where full HD 1080p can be passed over an IP network delivering full audio, video, power, data, and control using a single Ethernet cable.

KANEX PRO EXT-AVIPH264RX MAIN FEATURES

• Decode & extend pure 1080p resolutions up to 394’ / 120 meters
• Features real-time AV coding and decoding to broadcast 1080p
• H.264 Compression technology
• Can be used with a DVI connection
• Supports one too many, many too many, and point to point broadcasting
• Dual power input: 802.3af compliant w/ POE & DC 5V
• No power is needed when connecting through a POE network switch
• Can be cascaded to multiple extenders
• Supports LPCM audio format
• Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)
• Wide-band IR pass-through to control the source (38khz to 56khz)
• Bi-directional UART/RS232 (Up to 115200), use remote controller to select 8 group Baud rate
• Supports one to one, one to many, many to one, many to many modes, with large cascading

Performance

• Protocol: H.264 encoder over TCP/IP
• Supported Video formats: 480i/480p/576i/576p/720p/1080i/1080p@60HZ
• Supported Audio formats: LPCM, Audio sampling rate 48KHz
• Streaming Bit Rate: 15Mbps
• HDCP Compliant
• IR Frequency 38 -56 kHz
• RS232 Baud rate: Default 2400bps, total 8 options

IP setting & Group ID settings

Default IP:

• TX: 192.168.1.11
• RX: 192.168.1.12
• Group ID Group 00 ~ group 63
• Request for Switch/Router Support: IGMP, supports DHCP

• Input 1xHDMI Female port
• Output 1x RJ45 output, 1x HDMI looping output
• RS232 Phoenix RS232 port IR IR TX port (Support 38K-56KHz)
• IR Ext port (Support 38KHz)

Connectors on Receiver

• Input 1xRJ45 input
• Output 1x HDMI Female port looping output
• RS232 Phoenix RS232 port
• IR IR RX port (Support 38K-56KHz)
• IR Ext port (Support 38KHz)

Environmental & Power RequirementsEnvironment

• Operating temperature: -5 to +35 C (+23 to +95 F)
• Operating Humidity Range: 5 to 90%RH (No Condensation)
• Power supply: DC 5V 1A
• Power consumption: Max 3 watts

Physical Dimensions:

• Tx:119x79.5x28mm
• Rx: 119x79.5x28mm
• Net Weight TX: 0.28Kg RX:0.28Kg