KORG ARPMODULE1 ODYSSEY MODULE RV1 WHITE

Name: KORG ARPMODULE1 ODYSSEY MODULE RV1 WHITE
Brand: KORG
SKU: ARPMODULE1
Price: 649.99 USD
Availability: InStock

Vendor: KORG

Description KORG ARPMODULE1 ODYSSEY MODULE RV1 WHITE The white ARP Odyssey Module made by Korg is the professionally designed re-creation of the classic analog synthesizer minus the keys. The synthesizer was originally produced in the 1970s and...

$649.99 $950.00

Default Title

Subtotal:

Quantity

Description

KORG ARPMODULE1 ODYSSEY MODULE RV1 WHITE

The white ARP Odyssey Module made by Korg is the professionally designed re-creation of the classic analog synthesizer minus the keys. The synthesizer was originally produced in the 1970s and highly regarded for its sharp penetrating sound and rich range of tonal variations. This module is professionally designed featuring the original circuitry along with some updated features including MIDI and USB.

The synth module is built capable of offering a monophonic or duophonic operation. The oscillator section comes including two VCOs with sawtooth, square, and pulse waveforms. Additionally, all three revisions of the filter are immediately accessible with the use of a switch and further broaden the tonal palette. Type I (rev. 1) is a 12 dB/Oct circuit, while Type II and III (Rev. 2 & 3) are 24 dB/Oct, and each type that is adding distinct flavors and colors to the sound. Both of the portamento circuits (Rev.1 & 2/3) are available as well, and a drive circuit has been added to the VCA at the same time, producing distortion and generating a rough and raw sound. All of the sliders have been updated and are smoother than the original, that makes the synth uncompromisingly playable.

A variety of functions and modulation possibilities are made provided by oscillator sync, sample & hold, pulse-width modulation, a high-pass filter, an LFO, two types of envelope generators, and pitch bend with the use of the proportional pitch controls (PPC). The ARP Odyssey ships along with a power adapter, a 1/4" cable, and an 1/8" cable.

Monophonic or duophonic operation
2x VCOs featuring Sawtooth, Square, and Pulse waveforms
VCF switchable between rev. I, II, and III
VCA with overdrive
ADSR envelope generator
AR envelope generator
LFO
Noise generator
Portamento
Ring modulator
Sample & hold
External audio input
USB MIDI
CV/Gate I/O
Extended body protects keys
Phone and mini-phone cables included

ARP · 1 Neuromancer

Specifications

Polyphony	Maximum Polyphony: 2 voices for duophonic; normally monophonic
Controllers	Transpose Positions: 2 octaves down, normal, 2 octaves up Proportional Pitch Control Pitch Down Pad (b): about -2 / 3 octave Modulation Pad (-) Pitch Up Pad (#): about +2 / 3 octave
Noise Generator	Noise Spectrum Types: White and pink
Portamento	Maximum Speed: About 0.01 ms/oct Minimum Speed: About 1.5 seconds/oct
VCO	Voltage-Controlled Oscillator Waveforms: Sawtooth, square, pulse (dynamic pulse) Frequency Range: VCO-1 in Low-Frequency Mode: 0.2 to 20 Hz VCO-1 and VCO-2 (Audio Range): About 20 Hz to 20 kHz Warm Up Drift: 1/30 semitone from turn on max Pulse Width: 50 to 5% Pulse Width Modulation: ADSR: +45% LFO: +15% Voltage Controlled Response: 1 V/oct Maximum Frequency Shifts: LFO Sine Wave: +1/2 oct. LFO Square Wave: +1.5 oct. ADSR: +9 oct. S/H: +2 oct. (*VCO-1 is low-note priority, VCO-2 is high-note priority)
VCF	Voltage Controlled Filter Types: Low pass (I: 12 dB/oct., II III: 24 dB/oct.) Frequency Range: 16 Hz to 16 kHz Maximum Usable Q: 30 Resonance: 1/2 - self oscillate Voltage Controlled Response: C3 key (left edge) 0 V C6 key (right edge) 3 V
VCA	Voltage Controlled Amplifier Dynamic Range: 80 dB
Ring Modulator	Type: Digital Input Signal: VCO-1, VCO-2 (square wave)
Sample & Hold	Command Sources: Keyboard or LFO trigger Sampled Signals: VCO-1 sawtooth wave and square wave VCO-2 square wave and pink noise
Envelope Generators	ADSR Envelope Generator Attack Time: 5 msec. to 5 sec. Decay Time: 10 msec. to 8 sec. Sustain Level: 0 to 100% or Peak Release Time: 15 ms to 10 seconds AR Envelope Generator Attack Time: 5 ms to 5 seconds Release Time: 10 ms to 8 seconds
Control Input	Control Input Jacks Pedal: 1/4" / 6.3 mm monaural phone jack Portamento Foot Switch: 1/4" / 6.3 mm monaural phone jack
Audio Output	Low Connector: 1/4" / 6.3 mm monaural phone jack Maximum Output Level: -20 dBu @ 10 kOhms load Output Impedance: 10 kOhms High Connector: XLR connector Maximum Output Level: +4 dBu @ 1 kOhm load Output Impedance: 330 Ohms Headphones Connector: 1/4" / 6.3 mm stereo phone jack Maximum Output Level: 50 + 50 mW @ 33 Ohms load Output Impedance: 10 Ohms (Controllable by volume knob)
External Analog Audio Input	Connector: 1/4" / 6.3 mm monaural phone jack Maximum Input Level: -10 dBu Input Impedance: 22 kOhms
MIDI	In
USB	Type B
CV In/Out Controls	Keyboard CV (In/Out): 1 V/octave Connector: 1/8" / 3.5 mm monaural phone jack
Gate	Gate In: +3 V (minimum) Gate Out: +10 V, key down; 0 V all keys up Connector: 1/8" / 3.5 mm monaural phone jack
TRIG Connector	Trig In: +3 V pulse min., 10 μsec duration minimum Trig Out: +10 V pulse on key depression, 10 μsec duration Connector: 1/8" / 3.5 mm monaural phone jack
Power	Power Supply: AC adapter jack (9 VDC) Power Consumption: 6.5 W
Dimensions (W x D x H)	19.5 x 10.4 x 3.5" / 496.1 x 264.9 x 88.9 mm
Weight	8.2 lb / 3.7 kg