Lectrosonics IFBT4-23, IFB TX, BASE STATION TYPE, DIGITAL HYBRID (Frequency Block 23)

Vendor: Lectrosonics
Descriptions Lectrosonics IFBT4-23, IFB TX, BASE STATION TYPE, DIGITAL HYBRID (Frequency Block 23) The Lectrosonics IFBT4-23 is a high-quality IFB transmitter with a unique design for applications where long operating range and great...
$1,374.00
Title

Lectrosonics IFBT4-23, IFB TX, BASE STATION TYPE, DIGITAL HYBRID (Frequency Block 23)

The Lectrosonics IFBT4-23 is a high-quality IFB transmitter with a unique design for applications where long operating range and great audio quality are needed, such as broadcasting, film, and theater. The sleek, simple box of the Lectrosonics IFBT4-23 can be used as a stand-alone unit or patched into other widely-used intercom systems. The single XLR input connector is accompanied by four DIP-switches for selecting a mic, line, Clear-Com, RTS1, or RTS2 audio source. Also, it has a Digital Hybrid Wireless technology that allows the system to overcome channel noise by digital encoding and decoding audio in the transmitter and receiver but sending the encoded signal over an analog FM signal. Due to the FM link being used, the system has all the benefits of traditional FM systems, including high range and resistance to interference, but thanks to the digital technology, the analog compander and artifacts are removed for greater audio quality. The system is very easy and friendly to use, featuring a menu-based, microprocessor-controlled system that is navigated with momentary buttons. The Lectrosonics IFBT4-23 has a bright backlit LCD for easy reading. The casing of the Lectrosonics IFBT4-23 is constructed from rugged aluminum to withstand the rigors of professional use, and it is small enough to use in any situation.

Lectrosonics IFBT4-23 Main Features

  • Dual Hybrid Wireless Technology
  • XLR Input
  • Backlit LCD
  • Aluminum Construction
  • Sleek, easy to use IFB transmitter with long-range, terrific audio, and low distortion
  • Digital Hybrid Wireless technology combines digital and analog technologies to reap the benefits of both
  • Choose from 256 UHF frequencies in 100kHz steps
  • Microprocessor-controlled with easy-to-use menu-based navigation
  • Standard 3-pin XLR jack can accept mic, line, Clear-Com, RTS1, and RTS2 signals
  • The output power of 250mW for long-range transmission, BNC antenna included
  • Built-in mic preamp
  • Pilot tone squelch control
  • Frequency scrolling with Tx mute
  • Easy-to-read LCD Display
  • Compact and rugged aluminum housing
Operating Frequency 588.8 to 614.3 MHz
Frequencies 256 Channels Per Block
Channel Spacing 100 kHz
Spurious and Harmonic Suppression 37 dBc Above 1 GHz
Frequency Stability ±0.001% (10 ppm) @ 77°F (25°C)
Temperature Stability ±0.001% (10 ppm) @ -22 to 122°F (-30 to +50°C)
Compatibility Modes IFB, Digital Hybrid Wireless (400 Series), 100 Series, 200 Series, Mode 3, Mode 6
Pilot Tone 29.997 kHz IFB Mode, 32.765kHz 200 Mode, 400 Mode Step Selected, 32.768 kHz Mode 6
Modulation FM, ±20 kHz Deviation IFB & 100 Mode, ±75 kHz 200 & 400 Mode, ±50 kHz Mode 3 and Mode 6
Audio Frequency Response 100 Hz - 8 kHz, ±1 dB IFB Mode
30 Hz - 20 kHz, ±1 dB 200 & 400 Mode
Low-Frequency Roll-Off 3 dB Down @ 35 or 50 Hz, Menu Selectable
Signal to Noise Ratio 90 dB Typical, A-Weighted
RF Power Output 250 mW, Nominal
Output Impedance 50 Ohms
Audio Input Level Line, RTS1, RTS2: 0 dBu
Clear-Com: -10 dBu
Mic Dry Inputs: -42 dBu
Audio Input Impedance Balanced: Greater than 2 kOhms
Unbalanced: Greater than 1 kOhm
Gain -18 to +24 dB, Software Selectable
Connectors 1 x XLR Input Connector
1 x BNC Antenna Connector
1 x DC Power Input
Controls and Indicators 4 x Mode Switches (For Selecting Type of Input Source)
1 x Menu Button
2 x Select Buttons (Up/Down)
1 x Off/Tune/Xmit Switch
1 x Backlit LCD Display
Power 12-14 VDC, Typical, 200 mA Max
Dimensions (LxWxH) 5.25 x 3.25 x 1.25" (133 x 83 x 32 mm)
Weight 9 oz (255 g)