Lectrosonics WM/VT500WATER-19 (2 AA Batteries)

Lectrosonics WM/VT500WATER-19, WATER-TIGHT TX WITH VT500WATER LAV MIC UPGRADE

Name: Lectrosonics WM/VT500WATER-19, WATER-TIGHT TX WITH VT500WATER LAV MIC UPGRADE
Brand: Lectrosonics
SKU: WM/VT500WATER-20
Price: 1799.00 USD
Availability: InStock

Vendor: Lectrosonics

Descriptions Lectrosonics WM/VT500WATER-19, WATER-TIGHT TX WITH VT500WATER LAV MIC UPGRADE The Lectrosonics WM/VT500WATER-19 is a Belt-Pack Transmitter with Lavalier Mic which is designed and built for wet or dusty environments. It features an O-ring sealed battery...

$1,799.00 $2,530.00

20: 512.000 - 537.500 MHz

21: 537.600 - 563.100 MHz

22: 563.200 - 588.700 MHz

23: 588.800 - 607.900 & 614.100 - 614.300 MHz

470: 470.100 - 495.600

Subtotal:

Quantity

Descriptions

Lectrosonics WM/VT500WATER-19, WATER-TIGHT TX WITH VT500WATER LAV MIC UPGRADE

The Lectrosonics WM/VT500WATER-19 is a Belt-Pack Transmitter with Lavalier Mic which is designed and built for wet or dusty environments. It features an O-ring sealed battery compartment and input jack, a compression sealed antenna port, and a gasket sealed control panel and back cover. It can be used when paired with a wireless receiver for capturing audio in broadcast TV, ENG (Electronic Field Productions), and EFP (Electronic Field Production) applications, and more. The Lectrosonics WM/VT500WATER-19 has a Dual AA batteries that give twice the operating time of earlier watertight transmitter designs and the larger membrane switches and control panel have a highly visible backlit LCD, which enhances the user interface. In addition, there are 50, 100, or 200 mW selectable-output power switches to maximize battery life and operating range. Some other features include servo bias input circuitry with selectable voltage for compatibility with other microphones, and programmable compatibility mode for use with a wide variety of different receivers. The Lectrosonics WM/VT500WATER-19 transmitter is enclosed in a machined-aluminum corrosion resistant housing and includes a Lectrosonics M152/WP omnidirectional lavalier mic, a belt clip, an O-Ring kit, and two AA lithium batteries.

Lectrosonics WM/VT500WATER-19 Main Features

For Broadcast, EFP and ENG Applications
Water-Resistant Seals
Selectable 50, 100 & 250 mW Output Power
LCD Interface with Lockout Option
Servo Bias Input
Digital Hybrid Wireless Technology
No Pre-Emphasis/De-Emphasis
Low Frequency Roll-Off
Input Limiter

Specifications

Operating Frequency	486.400-511.900 MHz, 20: 512.000 - 537.500 MHz, 21: 537.600 - 563.100 MHz, 22: 563.200 - 588.700 MHz, 23: 588.800 - 607.900 & 614.100 - 614.300 MHz, 470: 470.100 - 495.600 MHz
Channel Spacing	100 kHz
Frequency Selection	Control panel mounted membrane switches
RF Power Output	Switchable; 50, 100 or 250 mW
Compatibility Modes	Digital Hybrid Wireless (400 Series), 200 Series, 100 Series, Mode 3, Mode 6, IFB
Pilot Tone	25 to 32 kHz; 5 kHz deviation (in 400 Series Mode)
Frequency Stability	± 0.002%
Deviation	± 75 kHz max. (In 400 Series Mode)
Spurious Radiation	60 dB below carrier
Equivalent Input Noise	-125 dBV, A-weighted
Input Level	If set for dynamic mic: 0.5 mV to 50 mV before limiting; greater than 1 V with limiting If set for electret lavalier mic: 1.7 uA to 170 uA before limiting; greater than 5000 uA (5 mA) with limiting Line level input: 17 mV to 1.7 V before limiting; greater than 5 V with limiting
Input Impedance	Dynamic mic: 300 Ohms Electret lavalier: input is virtual ground with servo adjusted constant current bias Line level: >2.7 kOhms
Limiter	Soft limiter, 30 dB range
Bias Voltage(s)	Selectable 2 V, 4 V, and off
Gain Range	44 dB; panel mounted membrane switches
Modulation	Dual bicolor LEDs indicate modulation of -20, -10, 0, +10 dB referenced to full modulation
Controls	Control panel with LCD and four membrane switches
Low Frequency Roll-Off	Adjustable from 35 to 150 Hz
Audio Frequency Response	35 Hz to 20 kHz, +/-1 dB
Signal to Noise Ratio	SmartNR Off: No Limiting: 103.5 dB Limiting: 108 dB SmartNR Normal: No Limiting: 107 dB Limiting: 111.5 dB SmartNR Full: 108.5 dB 113 dB
Total Harmonic Distortion	0.2% typical (400 Series mode)
Audio Input Jack	0.1" (2.5 mm) locking micro; threaded for stainless sleeve on WP connector
Antenna	Flexible, unbreakable steel cable
Batteries	Two 1.5 Volt AA lithium recommended
Battery Life	50 mW: Lithium: 13 hours 100 mW: Lithium: 10:45 hours 250 mW: Lithium: 5:45 hours
Emission Standard	180KF3E
Dimensions	2.98 x 2.55 x 0.77" (75.7 x 64.8 x 19.6 mm)
Weight	5.33 oz (151 g) with lithium batteries