Listen Technologies LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz)

Vendor: Listen Technologies
Listen Technologies LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz) Variants: LR-5200-072 - 72 MHzLR-5200-216 - 216 MHz Listen Technologies’ LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72...
$261.00 $289.00
Frequency

Listen Technologies LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz)

Variants:

LR-5200-072 - 72 MHz
LR-5200-216 -
216 MHz

Listen Technologies’ LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz) is offering assistive listening users an option for high-performance audio in a compact device that offers best-in-class pickup and reduced noise. The LR-5200-072 / LR-5200-216 also provides houses of worship, theaters, lecture halls, and other venues with an affordable and easy-to-manage solution when adding or expanding their assistive listening options. The LR-5200-072 / LR-5200-216 is an affordable and ecologically responsible option thanks to the integrated rechargeable battery technology, which lowers operating and ownership costs while providing longer usage. Each device has a micro-USB port that may be utilized for convenient and rapid battery charging as well as quick and easy firmware upgrades, setup, and programming using the free iDSP software.

The integrated neck loop and lanyard with DSP loop driver makes the LR-5200-072 / LR-5200-216 easy to wear and convenient for listeners with T-coil equipped hearing aids. Additionally, the OLED display built in to each receiver provides at-a-glance information including channel status, battery level, and more. From classrooms to conferences, businesses to banquet halls, and more, the LR-5200-072 / LR-5200-216 makes an outstanding choice for a comfortable, clear, and reliable personal listening receiver,

Audio

Frequency Response 50 Hz - 15 kHz (±3 dB)
System Distortion < 2% total harmonic distortion (THD) at 80% deviation
Output/s Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
System Signal to Noise Ratio SQ enabled 80 dB, SQ disabled 60 dB

Controls

User Controls Power, up/down volume, Listen button for end user channel selection
Programming Via software and USB port
Set-up Controls Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel

Indicators

LEDs Flashes when batteries are low or to indicate charging, solid when fully charged
Display Channel designation,battery level, unit number, charging status

RF

Frequency Range 72.025 - 75.950 MHz
Number of Channels 17 wide band, 40 narrow band
Sensitivity .6uV typical, 1 uV maximum for 12 dB sinad
Frequency Accuracy ± .005% stability 32 to 122 ºF (0 to 50 ºC)
Squelch Programmable in 20 steps, automatic on loss of RF signal
Antenna Type Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable

Power

Power Supply Micro USB connector, 5 V, 500 mA
Battery Type Lithium Ion 3.7 Vdc, 1200 mAh
Battery Life 8 Hours of continuous use
Battery Charging Time Fully charged in 2.5 Hours

Physical

Color Black
Unit Weight with Batteries 2.40 oz. (68 g)
Shipping Weight 3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum
Dimensions (H x W x D) 3.75 x 2.0 x 0.64 in. (9.6 x 5.0 x 1.7 cm)
Unit Weight 1.60 oz. (45 g)
Dimensions with Belt Clip 3.75 x 2.0 x 0.80 in. (9.6 x 5.0 x 2.1 cm)