Martin Audio CDD-LIVE8, Self-powered, 2-way system with an 8 inch Driver Black & White
Vendor: Martin Audio
Available
Martin Audio CDD-LIVE8, Self-powered, 2-way system with an 8 inch Driver Black & White
Martin Audio CDD-LIVE8 has a wide coverage close-up, the Coaxial Differential Dispersion technology employed in the Martin Audio CDD-LIVE 8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns, and its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. A self-powered system, the Martin Audio CDD-LIVE 8 incorporates a two-channel Class D amplifier, DSP, and Dante™ digital audio networking — simplifying set-up, enhancing control, and eliminating amplifier racks. The onboard amplifier delivers 1000W LF + 300W HF peak output to the drivers, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain, and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.
Martin Audio CDD-LIVE8 had a simple set-up, ‘plug-and-play’ presets — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. As an alternative to its analog inputs, the Martin Audio CDD- LIVE 8 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run. The Martin Audio Martin Audio CDD-LIVE 8 is incredibly versatile. Its multi-angle enclosure can be used in either horizontal or vertical orientation, with the rotation of the driver easily accomplished by removing the screw-free, protective grille. The tour-grade enclosure is constructed from multi-laminate plywood and finished in a hard-wearing polyurea coating. Integral fittings include a top-hat for pole mounting and multiple M8 inserts for attachment to a wall-bracket, yoke, or universal bracket with a wide range of up and down tilt angles.
Martin Audio CDD-LIVE8 Main Key Features
- Ultra-Compact, self-powered two-way system
- Coaxial Differential Dispersion™ technology
- Onboard Class D amplification and DSP
- Dante™ Digital Audio networking
- Global mains operation with Power Factor Correction
- User-rotatable CDD™ driver
- Vertical and horizontal mounting options
- Tour-grade, multi-angle plywood enclosure
- IP24 rating option with rain cowl
- Comprehensive mounting accessories
ACOUSTICS | |
TYPE | Ultra-Compact, Coaxial Differential Dispersion powered two-way system |
FREQUENCY RESPONSE (1) |
70Hz – 20kHz ±3dB, -10dB @ 50Hz |
DRIVER | LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver |
INPUT SENSITIVITY | -26dBu for 100dB SPL |
MAXIMUM SPL (2) | 117dB continuous / 123dB peak |
DISPERSION | 110˚-80˚ horizontal, 60˚ vertical (user-rotatable) |
CROSSOVER | 2.3kHz Active LR8 Balance presets for pole mount/ pole mount with sub/ stage monitor |
MODULE AUDIO INPUT | |
CONNECTORS | Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon |
ANALOGUE INPUT IMPEDANCE | 20 kΩ balanced to ground |
MAXIMUM ANALOGUE INPUT LEVEL | 24.6 Vpp (+21dBu), over-voltage protected |
INTERNAL PROCESSING | Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via a rear panel switch |
NETWORK | |
CONNECTORS | 2x Neutrik ® Ethercon RJ45 |
PROTOCOL | TCP/IP and UDP/IP |
AMPLIFIER | |
TYPE | 2 channel switch-mode, class D |
PEAK OUTPUT POWER | 1300W total 1000W LF, 300W HF |
AVERAGE EFFICIENCY | 89% |
COOLING | External convection cooled, with an internal fan |
MAXIMUM AMBIENT TEMPERATURE | 40°C (104°F) for full output |
POWER SUPPLY | |
TYPE | Switch mode, the fixed frequency with PFC |
AC INPUT OPERATING RANGE | 85 – 265V ~ AC, 50 - 60Hz |
POWER FACTOR | > 0.98 |
NOMINAL POWER CONSUMPTION | 85W |
MAINS CONNECTOR | Neutrik® Powercon True1 |
MECHANICAL | |
ENCLOSURE | Extensively braced multi-laminate plywood. |
FINISH | Textured black PU coating. |
PROTECTIVE GRILLE | HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with the black grille cloth |
FITTINGS | Top hat for pole mounting 15 x M8 mounting points Single pocket handle Optional weather protection cowl |
IP RATING | IP24 factory option available |
DIMENSIONS | (W) 258mm x (H) 428mm x (D) 254mm (W) 10.16in x (H) 16.85in x (D) 10.00in |
WEIGHT | 14kg (30.8lbs) excluding Transit cover |
ACCESSORIES | Transit Cover Optional wall, yoke, and universal brackets |