Martin Audio DSX / DSXF, High output 2x18" Subwoofer Ground Version and Flying Version

Name: Martin Audio DSX / DSXF, High output 2x18" Subwoofer Ground Version and Flying Version
Brand: Martin Audio
SKU: DSX
Price: 13000.00 USD
Availability: InStock

Vendor: Martin Audio

Martin Audio DSX, High output 2x18" Subwoofer Ground Version The Martin Audio DSX’s high output capability is achieved by combining state-of-the-art driver technology with an onboard Class D amplifier module that can deliver...

$13,000.00

Ground Version

Flying Version

Subtotal:

Quantity

Description

Martin Audio DSX, High output 2x18" Subwoofer Ground Version

The Martin Audio DSX’s high output capability is achieved by combining state-of-the-art driver technology with an onboard Class D amplifier module that can deliver 6kW peak power. Its two reflex-loaded 18” (450mm)/4” (100mm) drivers perfectly balance low-frequency extension and impact. Forward output, as well as rear rejection, can be optimized to achieve coverage where required and cancellation elsewhere. A flying version, the DSX-F can be flown alongside or at the top of MLA Compact arrays, as well as being ground-stacked. The ground-stack DSX can be upgraded to a DSX-F by an easy-to-fit accessory kit.

Martin Audio DSX Main Features

Ultra-high output subwoofer with onboard Class D amplification. DSP and networking
Two reflex-loaded 18” (450mm)/4” (100mm) drivers perfectly balance low-frequency extension and impact
Switched-mode power supply with PFC (Power Factor Correction) and global mains voltage operation
Forward or rear-facing operation
Designed to meet IP24 environmental rating

Specification

ACOUSTICAL
TYPE	Dual 18” reflex-loaded subwoofer
FREQUENCY RESPONSE (1)	35Hz-150Hz ± 3dB
MAXIMUM SPL	138dB continuous, 146dB peak (3)B
DRIVERS
DSX/DSX-F	2x18” 100mm /4” voice coil, ultra-long excursion, high-efficiency ferrite magnet
RATED POWER (2)
DSX/DSX-F	2400W AES, 9600W peak
DISPERSION
DSX/DSX-F	Digitally controlled in an array
AUDIO INPUT
CONNECTORS	Female XLR input, male XLR link output
ANALOGUE INPUT IMPEDANCE	20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL	6.15Vrms (+18dBu), over-voltage protected
AES/EBU IMPEDANCE	110Ω balanced, Receive and transmit termination
INTERNAL PROCESSING
DSX/DSX-F	Single-channel DSP, programmable via network 10 PEQ/shelving filters Up to 48dB/Oct HPF and LPF Up to 1 second of delay Limiters with amplifier output current monitoring
NETWORK
CONNECTORS	IP68 rated 8-way, quick-release type
PROTOCOL	U-NET
AMPLIFIER MODULE
TYPE	Single-channel switch-mode, fixed frequency
PEAK OUTPUT POWER	6000W
AVERAGE EFFICIENCY	85%
COOLING	2 x temperature-controlled internal fans 1 x low-speed internal blower 1 x temperature-controlled external fan
MAXIMUM AMBIENT TEMPERATURE	45°C (113°F) for full output
POWER SUPPLY
TYPE	Switch mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE	100–240V ~ AC, 50 - 60Hz
AC POWER FACTOR	> 0.95
NOMINAL POWER CONSUMPTION	900W
MAINS CONNECTOR	16A IEC309 (Ceeform) IP44 rated (IP67 when mated with mains distribution equipment supplied with the system)
GENERAL
ENCLOSURE	Extensively braced multi-laminate birch-ply
FINISH	Textured black PU coating
PROTECTIVE GRILLE	Black HEX perforated steel
DSX FITTINGS	Two skids on base, with mating channels on top Four inter-locking skids on each side Large bar handle on each side Four rear-mounted 100mm (4in) castors DSX transit cover, with integral plywood lid Weather protection cowl
DSX-F FITTINGS (IN ADDITION TO DSX FITTINGS - APART FROM WHERE INDICATED)	Rear castors replaced by front-mounted wheel board Four proprietary flying brackets and quick-release pins Side-mounted skids replaced by four interlocking rubber side cheeks DSX-F transit cover, with an integral plywood lid
IP RATING	IP 25
DIMENSIONS DSX	(W) 1060mm x (H) 595mm x (D) 834mm (1027mm with vent flap open) (W) 41.7in x (H) 23.4in x (D) 32.8in (40.4in)
DIMENSIONS DSX-F	(W) 1125mm x (H) 595mm x (D) 847mm (1027mm with vent flap open)
WEIGHT DSX	122.2kg (269lbs)
WEIGHT DSX-F	147.6kg (325lbs) ex. wheel board