Martin Audio SXH218, 2x 18" High-Output, Hybrid horn/reflex-loaded Subwoofer. Ground Version Black & White

Vendor: Martin Audio
Martin Audio SXH218, 2x 18" High-Output, Hybrid horn/reflex-loaded Subwoofer. Ground Version Black & White Its Hybrid® horn/reflex loading combines the acoustic efficiency and impact of bass horn technology with the low-frequency extension of...
$0.00
Color
Black
White

Martin Audio SXH218, 2x 18" High-Output, Hybrid horn/reflex-loaded Subwoofer. Ground Version Black & White

Its Hybrid® horn/reflex loading combines the acoustic efficiency and impact of bass horn technology with the low-frequency extension of a reflex design, enabling it to produce significantly higher output levels than a traditional reflex-loaded subwoofer. With an operating range of 32-150Hz + 3dB, it features dual long-excursion 18” (460mm)/4.5” (115mm) voice coil neodymium drivers, with water-resistant cones and triple roll surrounds. Also available is the Martin Audio SXHF218, a version of the SXH218 with flying hardware. It can be incorporated at the top of a WPL array, or more commonly flown as a separate array alongside. Like the ground-stack version, a combination of forwarding and rear-facing enclosures can be configured with specific directional properties. Also, Both the SXH218 and SXHF218 can be powered by either a single channel of a Martin Audio iK42 4-channel amplifier or a bridged pair if maximum output is required. Its connector sockets are wired so that one four-core cable from the amplifier will power two subwoofers. Subwoofer settings are determined by a pre-determined parameter set in Vu-Net when used in conjunction with iK42, or Settings are available from the Martin Audio website when used with alternative amplifiers. By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Martin Audio SXH218 Main Key Features

  • Ultra-high output ground-stacked subwoofer
  • Hybrid® horn/reflex loading for maximum acoustic efficiency and low-frequency extension
  • Dual long-excursion 18” (460mm)/4.5” (115mm) voice coil neodymium drivers
  • Forward or rear-facing operation
TYPE  Hybrid® horn/reflex subwoofer
FREQUENCY RESPONSE (1)  32Hz – 150Hz ±3dB, -10dB @ 27Hz
DRIVER  2 x 18” (460mm)/4.5” (115mm) voice coil, long excursion, neodymium magnet, waterproof cone
RATED POWER (2)  3000W AES, 12000W peak
RECOMMENDED AMPLIFIER  iKON iK42
SENSITIVITY (10)  107dB
MAXIMUM SPL (9)  148dB peak
NOMINAL IMPEDANCE  4Ω
DISPERSION (-6DB)  Omnidirectional/or Cardioid (paired)
ENCLOSURE  Multi-laminate birch/poplar ply
FINISH  Durable Polyurea Coating
PROTECTIVE GRILLE  Black perforated Zintec
CONNECTORS  2 x NL4
PIN CONNECTIONS (INPUT)  Input +1/-1
PINS CONNECTIONS (LINK)  Refer to SXH218 datasheet or Input panel diagram for linking   options
FITTINGS
  • Two skids on base, with mating channels on top
  • Four rear-mounted 100mm (4in) castors
  • 6 x bar handles, 3 on each side
  • 4 x fittings for optional transit cover
DIMENSIONS (INCL SKIDS)
  • (W) 1112mm x (H) 609mm x (D) 1023mm (1151mm incl. castors)
  • (W) 43.8in x (H) 24in x (D) 40.3in (45.3in incl. castors)
WEIGHT  116kg (256lbs), with castors 120kg (265lbs)