Meyer Sound MM-10ACX-3 Active Subwoofer

Vendor: Meyer Sound
Description Meyer Sound MM-10ACX-3 Active Subwoofer The Meyer Sound MM-10ACX-3 miniature subwoofer is professionally designed capable of delivering an expanded low frequency for applications that are requiring an excellent audio quality from a compact system. Carefully...
$0.00
Title

Meyer Sound MM-10ACX-3 Active Subwoofer

The Meyer Sound MM-10ACX-3 miniature subwoofer is professionally designed capable of delivering an expanded low frequency for applications that are requiring an excellent audio quality from a compact system. Carefully designed primarily as a companion to Meyer Sound's MM‑4XP miniature loudspeaker, as well as the UP‑4XP ultra-compact loudspeaker, both comes along with IntelligentDC technology, the MM‑10 is designed allowing the system designers for creating a full-range systems where space limitations are a concern.

The MM‑10 comes featuring an operating frequency range of 33Hz to 228Hz that comes along with a conservatively rated maximum peak SPL of 123dB. The MM‑10 bass reflex cabinet comes housing a single 10-inch driver and a single-channel power amplifier complete with onboard processing, this includes a crossover, driver protection, and frequency and phase correction. The built-in crossover is possible to accept full-range signals, facilitating basic daisy-chaining intended for signal distribution, which eliminates the need for external.

Applications

  • Background music
  • Small theatres
  • Portable AV systems
  • Compact voice reinforcement systems

Features

  • Powerful low-frequency response from a very small cabinet
  • Low distortion affords exceptionally clean bass
  • Adaptable to complement MM‑4XP and UP‑4XP loudspeakers
  • Versions include external IntelligentDC power supply or built-in AC power for driving satellite loudspeakers
  • Operating Frequency Range: 33Hz – 228Hz
  • Frequency Response: 35Hz – 208Hz ±4dB
  • Phase Response: 38Hz – 138Hz ±45°
  • Maximum Peak SPL: 123dB
  • Dynamic Range: less than 100dB
  • Coverage: 360°
  • Transducer
    • Type: 10-inch cone driver
    • Nominal Impedance: 4Ω
    • Voice Coil Size: 2 inches
    • Power Handling: 400W (AES)
  • Audio Input
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±5VDC
    • Input Impedance: 10kΩ electronically balanced
    • DC Blocking: 4.8Hz high pass
    • CMRR: < –60dB, typically < –72dB (200Hz – 3kHz)
    • RF Filter
      • Common mode: 616kHz
      • Differential mode: 616kHz
    • Nominal Input Sensitivity –2.0dBV (0.8V rms) continuous is typically the onset of limiting for noise and music
    • Input Level
    • Audio source must be capable of producing +16dBV (6.3V rms, 9.0V peak) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
  • Amplifier
    • Type: Class D
    • Output Power: 220W
    • Total Output: 440W peak
    • THD, IM, TIM < .02%
    • Load Capacity: 4Ω
    • Cooling: Convection
    • MM-10AC Rear Panel
  • Audio Connectors
    • XLR female input with XLR male loop output
    • Pin 1: Chassis/earth through 220 kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal –
    • Case: Earth ground and chassis
  • Input Polarity Switch: Reverses audio input polarity between pins 2 and 3
  • AC Power Connectors: powerCon 20 with loop output
  • LED: Displays loudspeaker status
  • MM-10AC AC Power
    • Voltage Selection: Automatic
    • Safety Agency Rated Operating Range: 100–240VAC, 50–60Hz
    • Turn-on and Turn-off Points: 90–264VAC, 50–60Hz
    • Current Draw:
    • Idle Current: 0.13A rms (115VAC); 0.13A rms (230VAC); 0.14A rms (100VAC)
    • Max. Long-Term Continuous Current (>10 sec): 0.40A rms (115VAC); 0.25A rms (230VAC); 0.46A rms (100VAC)
    • Burst Current (less than 1 sec): 0.9A rms (115VAC); 0.4A rms (230VAC); 1.1A rms (100VAC)
    • Ultimate Short-Term Peak Current: 2.0A peak (115VAC); 1.4A peak (230VAC); 2.3A peak (100VAC)
    • Inrush Current: 4.0A peak (115VAC); 2.4A peak (230VAC); 4.0A peak (100VAC)