Meyer Sound UP-4XP-5, 2x4" 3-Way Active Speaker, 5-Pin Input

Meyer Sound UP-4XP-5, 2x4" 3-Way Active Speaker, 5-Pin Input

The Meyer Sound UP-4XP-5 features an UltraCompact loudspeaker with IntelligentDC technology for applications requiring a small, inconspicious cabinet that can also delivers a high sound pressure levels, low distortion and uniform directional control. The Meyer Sound UP-4XP-5 is also a self-powered that can offers an exceptional audio performance in a compact package with the advantages of a remote power supply. The unit boast a wide operating frequency range of 66Hz to 18kHz and a maximum peak SPL of 121dB, with a very low distortion. The Meyer Sound UP-4XP-5 has a metal dome tweeters and cone transducers deliver a combined acoustic output to prevent interference. The UX-4XP delivers high-fidelity sound reinforcements in small venues for vocal reinforcement, frontfill coverage, and delay coverage for under-balcony applications. It can also be paired with an optional subwoofer to create a full-range system. Self-powered technology eliminates amplifier racks, long loudspeaker cables, and any calibration of gain and crossover settings. The system can be rigged and ready in minutes. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems. The UP-4XP's amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs.

Meyer Sound UP-4XP-5 Main Features

• Extraordinary fidelity and power capability come in an ultra compact package
• Metal dome tweeter delivers a smooth high-frequency response
• Wide, symmetrical pattern covers a broad listening area
• Unique crossover design eliminates combing and yields a consistent midrange response
• Exceptional SPL to size ratio provides flexibility
• Supports long cable runs with light-gauge cables

• Acoustic
• Operating Frequency Range: 66Hz – 18kHz
• Frequency Response: 72Hz – 17.5kHz ±4dB
• Phase Response: 360Hz – 12kHz ±45°
• Linear Peak SPL: 117.5dB with crest factor >17dB (M-noise), 111dB (Pink noise), 114.5dB (B-noise)
• Coverage
• Horizontal Coverage: 100°
• Vertical Coverage: 100°
• Transducers
• Low Frequency: Two 4-inch low-frequency cone drivers
• High Frequency: One 1-inch metal dome tweeter
• Audio Input
• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±5VDC
• Connectors: Phoenix or SwitchCraft EN3 5-pin male (two pins for 48VDC power, three pins for balanced audio)
• Input Impedance 10kΩ differential between positive (+) and negative (–) audio pins
• Wiring
• Pin 1: DC Power (-)
• Pin 2: DC Power (+)
• Pin 3: Audio Shield, Chassis/Earth
• Pin 4: Audio (-)
• Pin 5: Audio (+)
• Nominal Input Sensitivity –2.0dBV (0.8V rms) continuous average is typically the onset of limiting for noise and music
• Input Level Audio source must be capable of producing +16dBV (6.3V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
• Amplifier
• Type 3-channel, Class-D
• Total Output Power: 500W peak
• THD, IM, TIM < 0.02%
• Cooling: Convection
• DC Power
• Connector: Phoenix or SwitchCraft EN3 5-pin male (two pins for 48VDC power, three pins for balanced audio)
• Safety Rated Voltage 48VDC
• RMS Network (Optonal on required MPS-488HP Power Supply)
• Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
• Physical
• Dimensions W: 13.84in (352mm) x H: 5.54in (141mm) x D: 5.25in (133mm)
• Weight: 12.2 lb (5.53kg)
• Enclosure: Premium multi-ply birch with slightly textured black finish
• Protective Grille: Powder-coated, hex-stamped steel with black mesh screen
• Rigging: Top and bottom plates available with 3/8”-16 or M10 threads nuts