Meyer Sound UPM-1P-RMS-3, 2x5" Active Speaker, RMS, 3/8"-16, 3-Pin Input

Name: Meyer Sound UPM-1P-RMS-3, 2x5" Active Speaker, RMS, 3/8"-16, 3-Pin Input
Brand: Meyer Sound
SKU: UPM-1P-RMS-3
Availability: InStock

Vendor: Meyer Sound

Descriptions Meyer Sound UPM-1P-RMS-3, 2x5" Active Speaker, RMS, 3/8"-16, 3-Pin Input The Meyer Sound UPM-1P-RMS-3 is a remarkably compact, self-powered, professional sound reinforcement loudspeaker system. It is perfectly suited to applications requiring a relatively small...

or Call for pricing: 1-877-477-6432

Descriptions

Meyer Sound UPM-1P-RMS-3, 2x5" Active Speaker, RMS, 3/8"-16, 3-Pin Input

The Meyer Sound UPM-1P-RMS-3 is a remarkably compact, self-powered, professional sound reinforcement loudspeaker system. It is perfectly suited to applications requiring a relatively small and inconspicuous loudspeaker that can also provide high sound pressure levels, extremely low distortion, and uniform directional control. The Meyer Sound UPM-1P-RMS-3 loudspeaker provides vocal-range reinforcement as a small PA system or as a fill or delay loudspeaker in larger indoor or outdoor systems. A full-range system can be created with the addition of an optional subwoofer. The optional RMS™ remote monitoring system module provides comprehensive monitoring of loudspeaker parameters from a Mac® or Windows®-based computer running Compass® control software.

Meyer Sound UPM-1P-RMS-3 Main Features

Exceptional fidelity and power capability delivered in an ultracompact package
Wide, symmetrical pattern covers broad listening areas
Unique crossover design eliminates combing for consistent midrange response
Metal dome driver provides exceptionally smooth high-frequency characteristic

Specifications

Acoustic

Operating Frequency Range: 75Hz – 20kHz
Frequency Response: 80Hz – 16kHz ±4dB
Phase Response 415Hz – 16kHz ±45°
Linear Peak SPL: 118.5dB with crest factor >14dB (M-noise), 113dB (Pink noise), 115.5dB (B-noise)

Coverage

Horizontal Coverage: 100°
Vertical Coverage: 100°

Transducers

Low Frequency: Two 5-inch cone drivers; 8Ω nominal impedance
High Frequency: One 1-inch metal dome tweeter; 8Ω nominal impedance

Audio Input

Type: Differential, electronically balanced
Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
Connectors XLR 3-pin female input with male loop output; optional 5-pin connectors accommodate both balanced audio and RMS signals.
Input Impedance: 10kΩ differential between pins 2 and 3

Wiring

Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
Pin 2: Signal +
Pin 3: Signal –
Case: Earth ground and chassis

Nominal Input Sensitivity: 0dBV (1.0V rms) continuous is typically the onset of limiting for noise and music
Input Level Audio: source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
Amplifier

Type: Complementary MOSFET output stages (class AB/bridged)
Total Output Power: 650W peak
THD, IM, TIM: less than 0.02%
Cooling: Convection

AC Power

Connector: powerCON input with loop output
Voltage Selection External: 115/230VAC switch (100VAC version available)
Safety Rated Voltage Range Input rating: 115/230VAC, 50–60 Hz, 3A MAX;
Loop output rating: 115/230VAC, 50–60Hz, 12A MAX
Turn-on and Turn-off Points Fuse-protected above 135VAC (115VAC switch position) and 265VAC (230VAC switch position)

Current Draw

Idle Current: 0.13A rms (115VAC); 0.065A rms (230VAC); 0.15A rms (100VAC)
Maximum Long-Term Continuous Current (>10 sec): 1A rms (115VAC); 0.5A rms (230VAC); 1.2A rms (100VAC)
Burst Current (less than 1 sec): 1.3A rms (115VAC); 0.65A rms (230VAC); 1.5A rms (100VAC)
Maximum Instantaneous Peak Current: 2.9A pk (115VAC); 2A pk (230VAC); 3.3A pk (100VAC)
Inrush Current: 18A pk (115VAC); 12A pk (230VAC); 15A pk (100VAC)