FREE CHURCH DESIGNS
Call us 1-877-477-6432 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Neumann KH 310 A R G, Active Near-field Monitor, right version, 8" + 3" + 1" drivers, magnetically shielded
Vendor: Neumann
Descriptions Neumann KH 310 A R G, Active Near-field Monitor, right version, 8" + 3" + 1" drivers, magnetically shielded, 16.2 liters, 210 + 90 + 90 W, 116.3 dB SPL, 34 -...
Neumann KH 310 A R G, Active Near-field Monitor, right version, 8" + 3" + 1" drivers, magnetically shielded, 16.2 liters, 210 + 90 + 90 W, 116.3 dB SPL, 34 - 21k Hz, metallic anthracite
Powerful amplifiers with large headroom and overheat limiting
- In-house simulated tweeter with alloy fabric dome and robust metal grille
- Elliptical Mathematically Modelled Dispersion™ (MMD™) waveguide
- Two-color + dimmable Neumann logo
- In-house simulated, neodymium magnet, fabric dome, midrange driver with optimized low stray magnetic field
- In-house modelled long-throw composite sandwich cone bass driver with Extremely Linear Force Factor™ (ELFF™), magnetic shielding and flow optimized die cast basket
- Compact cabinet
- 4-position bass, low-mid and treble acoustical controls
- Wide range input gain and output level controls
- Display dimmer and ground lift
- XLR electronically balanced analogue input
- Universal switched-mode power supply (100 … 240 V)
- Fully documented extensive mounting hardware range
- Powerful amplifiers with large headroom and overheat limiting
Neumann KH 310 A R G Main Features
-
Quickest transient response of its class
-
Tremendous bass capability down to 34 Hz
-
Higher precision in the midrange through a specially designed driver
-
As a stereo system with KH 750 DSP and iPad® app, controllable and alignable to the room
| Free field frequency response ±6 dB | 30 Hz … 22 kHz |
| Free field frequency response ±3 dB | 34 Hz … 21 kHz |
| Free field frequency linearity deviation between 100 Hz and 10 kHz | ± 1.1 dB |
| Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced | ±0.87; ±0.39; ±0.23 dB |
| Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) | <20 dB(A) SPL |
| Sine wave output with a THD < 0.5 % at 1 m in half space | 95 dB SPL (>85 Hz) |
| Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 116.3 dB SPL |
| Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) | 110.3 dB SPL |
| Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) | 104.5 dB SPL |
| Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions | 113 dB(C) SPL |
| Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) | 100 dB(C) SPL |
| Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) | 107 dB(C) SPL |
| Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range) | 93 / 99 dB(C) SPL |
| Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer) | 94 / 100 dB(C) SPL |
| Analog input(s) | XLR: analog electronically balanced |
| Analog input impedance | >13k Ohms |
| Max. input level | +24 dBu |
| Common mode rejection ratio (CMRR) | >56 dB @ 15kHz |
| Input gain control (sensitivity) | 0 dB ... -15 dB |
| Output level control (output level in 1 m based on 0 dBu input level) | 94; 100; 108; 114 dB SPL |
| Controller design | Analog; active |
| Crossover frequency | 650 Hz and 2.0 kHz |
| Crossover slope | 24 dB/oct; 4th order |
| Equalization: Bass | 0; -2.5; -5; -7.5 dB |
| Equalization: Low-Mid | 0; -1.5; -3; -4.5 dB |
| Equalization: Treble | +1; 0; -1; -2 dB |
| Protection circuitry | Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters. Amplifier overheat. |
| Infrasonic filter: frequency; slope | 15 Hz; 6 dB/oct. |
| Display: On; Normal Operation | Neumann logo “White” |
| Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute | Neumann logo “Red” |
| Display Brightness | White: 100%/60%/30%/off; Red: 100%/60%/30% |
| Output power woofer amplifier (THD+N with limiter deactivated: 10%) | 210 W |
| Output power midrange amplifier (THD+N with limiter deactivated: 10%) | 90 W |
| Output power tweeter amplifier (THD+N with limiter deactivated: 10%) | 90 W |
| Output power woofer amplifier (THD+N with limiter deactivated: 0.1%) | 150 W |
| Output power midrange amplifier (THD+N with limiter deactivated: 0.1%) | 70 W |
| Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%) | 70 W |
| Mains Power Supply: input voltage; frequency | 100-240V; 50/60 Hz |
| Power consumption (230 V / 100 V): Idle | 24 W |
| Power consumption (230 V / 100 V): Full output | 300 W |
| Cabinet material | Polyurethane front, wooden sleeve, aluminum electronics panel |
| Cabinet surface finish; color (front / back) | Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
| Operating conditions | +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
| Transport/storage conditions | -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
| Woofer | 210 mm (8 1/4") magnetically sheilded |
| Midrange | 75 mm (3") with magnetic sheilding |
| Tweeter | 25 mm (1") with protecting black metal grille |
| Mounting points | 2 x M8 on side panels; thread depth from outside of cabinet 25 mm (1”);Rear panel screws for attaching LH 41 base plate |
| Product dimensions (height x width x depth) | 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2") |
| External net volume | 28.3 liters |
| Product weight | 13.0 kg (28 lbs 11 oz) |
| Packed dimensions (height x width x depth), mm (inches) | 360 x 380 x 590 mm (14 1/8" x 15" x 23 1/4") |
| Packed weight | 16.8 kg (37 lbs 1 oz) |
| Packed cube | 0.081 m³ |
