Neumann KM 185-MT-STEREOSET (Matt Black) / Neumann KM185 STEREO SET (Nickel)

Neumann KM 185-MT-STEREOSET (Matt Black) / Neumann KM185 STEREOSET (Nickel) Stereo set includes two each: KM 185, SG 21 BK, WNS 100 in one woodbox

The Neumann KM 185-MT-STEREOSET (Matt Black) / Neumann KM185 STEREOSET (Nickel) comes including two each: KM 185, SG 21 BK, WNS 100 in one wood box.

The Neumann KM 185 comes with hypercardioid characteristic that is featuring attenuation of sound incidence from the side or rear of about 10 dB, it comes at an angle of 120° of minimum sensitivity. The "Series 180" microphones have the same transformerless circuitry as is used in the KM 100 system, resulting in excellent technical specifications. The microphones are capable to operate without any problems, even if the input of following equipment happens to be unbalanced, for example as in some DAT recorders. The output of the "Series 180", as in all Neumann microphones, is balanced and phantom (48V) powered.

The Neumann SG21BK is a swivel mount that comes with a plastic clamp for miniature microphones. It comes w ith a 5/8"-27 female thread, plus a thread adapter for connecting to 1/2"- and 3/8" stands.

The WNS100 is a windscreen. Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. In order to avoid these unwanted sounds, windscreen accessories are made available. Typically, they are made out of open-cell polyurethane foam. These windscreens are made that do not cause interfering resonances and do not influence the directional pattern. Only in the upper frequency range is the output level slightly attenuated. The wind noise attenuation was measured without electrical filtering in a turbulent air stream traveling at 20km/h, generated by a noiseless wind machine. Acoustically transparent wind and pop protection with improved efficiency. Wind noise attenuation 21dB. Attenuation at 15kHz 1dB. Diameter 45mm, length 70mm. Color black.

Includes

• (2) KM185MT Microphones
• (2) WNS100 Windscreens
• (2) SG21 BK Stand Mount Swivel
• (1) Wood Box

Features

• Uniform hypercardioid pattern without off-axis coloration
• High suppression of unwanted sound
• Linear frequency response with a slight treble lift
• Low self-noise (15dB-A)
• Low impedance output for long cable runs without transmission losses
• Compact size, virtually unobtrusive

• Directional pattern: hypercardioid
• Frequency range: 20Hz - 20kHz
• Sensitivity at 1kHz into 1kΩ: 10mV/Pa
• Rated impedance: 50Ω
• Rated load impedance: 1Ω
• Equivalent noise level, CCIR: 24dB
• Equivalent noise level, A-weighted: 15dB-A
• Signal-to-noise ratio, CCIR: 70dB
• Signal-to-noise ratio, A-weighted: 79dB
• Maximum SPL for THD 0.5%: 142dB
• Maximum output voltage: 10dBu
• Supply voltage (P48, IEC61938): 48V +/- 4V
• Current consumption (P48, IEC61938): 3.2mA
• Matching connectors: XLR 3F
• Weight: approx. 80g
• Diameter: 22mm
• Length: 107mm
• Color: Matt Black or Nickel