Neumann TLM 102 STUDIO SET / TLM 102 STUDIO SET BK STUDIO SET

Vendor: Neumann
Description Neumann TLM 102 STUDIO SET / TLM 102 STUDIO SET BK STUDIO SET EA 4 shockmount and carton box The Neumann TLM 102 STUDIO SET comes styled in a nickel finish, while the TLM 102 STUDIO SET BK comes...
$799.00
Color
Black
Nickel

Neumann TLM 102 STUDIO SET / TLM 102 STUDIO SET BK STUDIO SET EA 4 shockmount and carton box

The Neumann TLM 102 STUDIO SET comes styled in a nickel finish, while the TLM 102 STUDIO SET BK comes styled in a black finish. It is a Large-Diaphragm Studio Condenser Microphone designed capable of operating in a cardioid polar pattern. The TLM 102 STUDIO SET comes with the ability to withstand very high sound pressure levels.

The capsule, that come with its high SPL rating, is intended for permitting the recording of drums, percussion, amplifiers, and other very loud sound sources. The microphone is designed equally capable by the time of recording lower volume sounds due to its fast transient response. However, its most important applications are in the realm of speech and vocals.

A slight boost above 6 kHz is designed for providing a great vocal presence, and below 6 kHz the frequency response is extremely linear made for minimal coloration and a clearly defined bass range at the same time. The capsule comes with an elastic suspension for minimizing the structure-borne noise, and an integrated pop screen in the grille is aiding in suppressing plosives in vocal and speech recording at the same time.

  • Large-diaphragm microphone with cardioid directional characteristic
  • Pressure-gradient transducer
  • Compact, smaller-scale body
  • Very high maximum sound pressure level (SPL)
  • Slight presence boost above 6 kHz
  • Transformerless circuitry
Microphone
Operating Principle Pressure Gradient
Capsule Condenser
Polar Pattern Cardioid
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 144 dB SPL
Impedance 50 Ohms
Load Impedance 1000 Ohms
Sensitivity 11 mV/Pa at 1 kHz into 1 Kilohms
Signal-to-Noise Ratio 73 dB CCIR
82 dB A-Weighted
Equivalent Noise Level 21 dB CCIR
12 dB A-Weighted
THD 0.5%
Connectivity
Output Connectors 1 x XLR 3-Pin
Power
Operating Voltage 48 V ± 4 V
Operating Current Consumption 3.5 µA
Physical
Dimensions ø: 2.05 x L: 4.57" / ø: 52 x L: 116 mm
Weight 0.46 lb / 210 g