Neumann TLM 107 STUDIOSET, Nickel / TLM 107 STUDIOSET BK, Black Set each with 1 x TLM 107 and EA 4
Vendor: Neumann
Available
Neumann TLM 107 STUDIOSET, Nickel / TLM 107 STUDIOSET BK, Black Set each with 1 x TLM 107 and EA 4
The Neumann TLM 107 STUDIOSET comes styled in nickel while the TLM 107 STUDIOSET BK sytled in black. It is professionally designed capable of providing you with a Neumann TLM 107 microphone, a stand mount, a wooden box, and an EA 4 Elastic Suspension Shockmount for isolating the mic from stand-associated rumble. The microphone is built capable to provide five polar patterns, transformerless circuitry, two selectable high-pass filters, two selectable pads, and more. The Elastic Suspension Shockmount are intended for providing a 5-8"-27 female thread and a thread adapter for 1/2"-3/8" stands.
The nickel / black Neumann TLM 107 is a high-quality, flexible large diaphragm condenser microphone that is created along with five selectable polar patterns that is designed capable of accommodating a wide variety of professional studio, broadcast and demanding home recording applications.
The TLM 107 is carefully engineered with a transformerless design that is permitting a high degree of linearity and a large dynamic range. Featuring selectable omnidirectional, wide angle cardioid, cardioid, hypercardioid and figure-8 polar patterns, this microphone is suitable for a wide range of miking techniques and configurations.
The mic also features -6dB and -12dB pads that can be engaged for recording louder sound sources such as brass or guitar amplifiers. Additionally, it has selectable high-pass filters at both 40 Hz and 100 Hz for filtering out unwanted low frequencies to save you time when mixing.
- Low self-noise of 10 dB-A
- Maximum sound pressure level of 141 dB SPL, can be increased to 153 dB SPL with pad
- Low cut and pad are controlled via navigation
- Pad and low cut status displayed by LED
- Illuminated polar pattern display
- Indicator light displays are turned off automatically after 15 seconds
Neumann EA 4 Elastic Suspension Shockmount
The nickel EA 4 Elastic Suspension Shockmount from Neumann has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. It is compatible with the Neumann TLM 102 and Sennheiser MK4 microphones.
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Polar Pattern | Cardioid, Figure-8, Hypercardioid, Omnidirectional, Wide-Angle Cardioid |
Pattern Selection | Switched |
Pad | -6 dB -12 dB |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 141 dB SPL |
Impedance | 50 Ohms |
Load Impedance | 1000 Ohms |
Sensitivity | 11 mV/Pa at 1 kHz into 1 Kilohms |
Signal-to-Noise Ratio | 72 dB CCIR 84 dB A-Weighted |
Equivalent Noise Level | 22 dB CCIR 10 dB A-Weighted |
THD | < 0.5% |
Output Connectors | 1 x XLR 3-Pin |
Operating Voltage | 48 V ± 4 V |
Operating Current Consumption | 3.2 mA |
Dimensions | ø: 2.52 x L: 5.71" / ø: 64 x L: 145 mm |
Weight | 15.7 oz / 445 g |