NEXO PS10U-R2, Compact high power 10 inches Speaker / Monitor
The new Nexo PS10U-R2 Loudspeaker can be safely driven with up to 1250 Watts of amplifier power, yet it is only half the weight and volume of common trapezoidal systems. The dispersion, architecture, and weight balance of the Nexo PS10U-R2 are designed to provide both exceptional PA and stage monitor performance from a single product without compromise. This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user. Coupled with the horn’s unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The 2-way passive 8 Ohm design uses a single amplifier channel to deliver bi-amped performance for less money, space, and complexity.
NEXO PS10U-R2 Main Features
- Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
- Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down, and near-field augmentation.
NEXO PS10U-R2 Applications
- Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
- Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down, and near-field augmentation.
Components: | ..... |
LF: 1 x 10" (25cm) Shielded Neodymium 8 Ohm driver. |
Height x Width x Depth: | ..... | 515mm x 316mm x 277 mm (20.28" x 12.44" x 10.91"). |
Weight: | ..... | 14 kg (31 lbs). |
Connectors: | ..... | 2 x NL4MP SPEAKON 4 pole |
Construction: | ..... |
Baltic Birch Ply finished with textured black coating |
Fittings: | ..... |
2 Metal recessed pockets. |
Front Finish: | ..... | Molded Dark Grey Metal Grill. |
Flying Points: | ..... | One plate connecting with external accessories. |
Stand Fittings: | ..... | Built-in Stand Fitting, (35mm / 1 3/8") |
Systems Specs with PS10 TDController: | ||
Frequency Response: | ..... | 69 Hz - 20 kHz +/- 3dB |
Usable Range @ -6dB: | ..... | 58 Hz - 21 kHz |
Sensitivity 1W/1m: | ..... | 99 dB SPL Nominal; 97 dB SPL Wideband |
Nominal Peak SPL: | ..... | 129 to 132 dB Peak |
HF Dispersion: | ..... |
Horizontal: 50 degrees to 100 degree |
Directivity: | ..... |
Q: 16 Nominal DI: 12 dB Nominal (f > 3.0 kHz) |
Crossover: | ..... | 2 kHz - Passive |
Nominal Impedance: | ..... | 8 Ohm |
Recommended Amp: | ..... | 500 W to 1,250 W / 8 Ohms |
System Operations: | ||
Electronic Controller: | ..... | The PS10 TDController is precisely matched to the PS10U-R2 & LS600 cabinets and includes sophisticated protection systems. Using PS10-R2 & LS600 without a properly connected PS8TD will result in poor sound quality and can damage the components. |
Dispersion Config: | ..... | After dismounting the front grille from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration. |
Sub-bass: | ..... | The PS10U-R2 can be used without the optional LS600 Sub-bass. Active two-way operation with the LS600 is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced LF capability. |
Speaker Cables: | ..... | PS10U-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons is present on both. Single identical cables can thus be used to loop through combinations of up to 2 x PS10U-R2 & 1 x LS600 in no particular order. |
Shipping and Ordering Specifications: | ||
Packaging: | ..... | PS10U-R2 is packaged as a single product. |
Shipping Weight/Vol: | ..... | 17.3 kg (38 lbs) / 0.169 cubic metres. |
Accessories: | ..... | A full selection of mounting accessories is available. (Sold Separately) |