OZEN OZEN-AG-25S 100mm FLUID HEADS
OZEN OZEN-AG-25S 100mm FLUID HEADS
The OZEN OZEN-AG-25S 100mm S-LOC Fluid Head is a professionally designed heavy-duty fluid head that comes featuring a wide camera interface intended for having steady support of camera rigs that are weighing up to 80 lb. The 150mm ball base is possible to be converted to a flat base for having lower-profile, slider, or car rig applications. A Build-Lock system comes providing your gear security and you with peace of mind during the time of assembling your camera and accessories on the head. The S-LOC plate are made for allowing 6.5" of travel intended for balancing the camera forward and back.
This head's familiar placement of pan, tilt, and counterbalance controls are created for offering comfort and ease while operating, and the 150mm ball base is enabling the fast leveling. This fluid head comes featuring nine steps of pan and tilt drag plus a "0" setting intended for whip pans, 16 steps of counterbalance adjustment, and a built-in illuminated bubble level. Independent pan and tilt locks are made for allowing you for locking off one axis and still move the head on the other axis. Replaceable pan handle rosettes on the left and right side of the head are made for enabling you to use both included telescoping handles simultaneously.
150mm Leveling Ball/Flat Base
The 150mm leveling ball is capable of making it quick to level the head on your tripod legs or other platforms and keeping the center of balance within the 6" diameter of the base for having a smoother operation without straining the head. The convertible flat base are providing a lower-profile base for a car rig, scaffolding, or other compatible support.
A 16-step counterbalance enables you to adjust the head for a variety of camera rigs weighing from 8.8 to 80 lb. A counterbalance system neutralizes the weight of the head, so it will hold the desired tilt position.
Pan and Tilt Drag
Nine steps and a zero setting enable you to adjust the head for smooth moves, fast or slow. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.
Build-Lock Safety System
The Build-Lock system allows you to engage a safety pin with the tilt at zero, preventing the tilt axis from moving, while you assemble the camera on the head without having to worry about stressing the pan lock or having the head tilt suddenly under an unbalanced load. Once the camera and accessories are assembled (built) and roughly centered on the head, release the pin and fine-tune the balance on the head.
QR Plate and Balance Adjustment
The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6" diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or another compatible support. The use of an optional baseplate or VCT system for increased balancing ability is customary with larger cameras.
Dual Pan Handle Rosettes
Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.
|Camera Plate Features||Sideload|
|Camera Mounting Screw||1 x 3/8"-16 Male
1 x 1/4"-20 Male
|Camera Platform Adjustment||6.5" / 16.5 cm|
|Base Mount||150 mm Half Ball
|Drag Control||Tilt: Stepped 9-Step Plus 0
Pan: Stepped 9-Step Plus 0
|Vertical Tilt||+90° to -80°|
|Independent Pan Lock||Yes|
|Independent Tilt Lock||Yes|
|Load Capacity||8.8 to 80 lb / 4 to 36.3 kg|
|Counter Balance||Incremental 16-Step|
|Pan Handle Fittings||2 x Rosette|
|Bubble Level||1 x Illuminated|
|Weight||11.3 lb / 5.1 kg|