OZEN OZEN-OZ-18CF1HDS AGILE 18S (S-LOC) w/2 extending pan bars + 100CF1HD w/CONTENDER & deep-tread rubber feet + Softcase 100HD1

Vendor: OZEN
OZEN OZEN-OZ-18CF1HDS AGILE 18S (S-LOC) w/2 extending pan bars + 100CF1HD w/CONTENDER & deep-tread rubber feet + Softcase 100HD1 The OZEN OZEN-OZ-18CF1HDS tripod system is professionally designed that is capable to stand up to the...
$5,790.25 $6,095.00
Title

OZEN OZEN-OZ-18CF1HDS AGILE 18S (S-LOC) w/2 extending pan bars + 100CF1HD w/CONTENDER & deep-tread rubber feet + Softcase 100HD1

The OZEN OZEN-OZ-18CF1HDS tripod system is professionally designed that is capable to stand up to the demands of ENG and EFP production along with the 100CF1HD 100mm Carbon Fiber Tripod & Agile 18S Fluid Head System that comes with S-Loc camera interface from OZEN. It is comprised of a 100CF1HD 100mm single-stage, heavy-duty carbon fiber tripod and an Agile 18S fluid head, this system comes working along with 4.4 to 48.4 lb payloads. It comes offering an 16-step counterbalance, 7/7 + 0 pan/tilt fluid drag, and working heights ranging from 36.9 to 66.8". The 100CF1HD comes equipped along with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for having a better traction on smooth surfaces. Included along with the system is a SoftCase 100HD1, which comes with a carry strap and an internal pouch for use in storing the included telescopic pan bars.

OZEN 100CF1HD 100mm Single-Stage Heavy-Duty Carbon Fiber Tripod
Provide your camera with a solid feet that can make it capable to stand on with the 100CF1HD 100mm Single-Stage Heavy-Duty Carbon Fiber Tripod from OZEN. Critically designed for heavy-payload and high-fluid-drag applications, this single-stage tripod is capable of supporting up to 99 pounds and is offering working heights ranging from 28.7 to 58.6". For greater rigidity, the 22mm diameter carbon fiber tripod leg tubes are pin-secured to their anchors—no glued joints. Twist brake levers that comes along with positive stops are used for locking the legs into place. Moreover, the 100CF1HD comes equipped along with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for having a better traction on smooth surfaces.

  • For use with separately available 100mm fluid heads
  • Carbon fiber leg tubes are lighter and stiffer than aluminum and resist damage from minor impacts
  • Carbon fiber tubes are pinned to their joints, not glued
  • Flat and angled spreader positions
  • Payload capacity of 99 pounds
  • Twist brake levers with positive stops

OZEN Agile 18S Fluid Head
You can smooth your pans and tilts along with the Agile 18S Fluid Head from OZEN. Critically designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 18S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 16 steps. The Agile 18S's versatile design enables you to quickly change camcorder configurations within a payload range of 4.4 to 48.4 pounds.

The Agile 18S is equipped with a 7/7 + 0 fluid drag mechanism and offers a tilt range of 90 to -80°. The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.

  • Ergonomic pan/tilt fluid drag and counterbalance controls
  • Distinguishable, 90° opposed pan and tilt brakes
  • Replaceable pan bar rosettes for longer fluid head usability
  • Illuminated bubble level
  • Constructed of CNC-machined and anodized aluminum with stainless steel fasteners
  • Two telescopic pan bars included

OZEN Soft Case for Single-Stage Heavy-Duty 100mm Systems for 100HD1 Tripod
The OZEN Soft Case for Single-Stage Heavy-Duty 100mm Systems for 100HD1 Tripod is a spare/replacement part. Users will appreciate the internal pouch for storing a pan bar and carry strap.

Replacement Soft Case 100HD1 included w/systems configured with 100AL1HD or 100CF1HD tripod

OZEN 100CF1HD 100mm Single-Stage Heavy-Duty Carbon Fiber Tripod Specs

General
Head Mount Type 100 mm Bowl
Load Capacity 99 lb / 44.91 kg
Maximum Working Height 58.6" / 148.84 cm (with Spreader)
Minimum Working Height 28.7" / 72.90 cm (with Spreader)
Materials Carbon Fiber
Weight 9 lb / 4.08 kg
Legs
Leg Lock Type Twist Lock
Leg Sections 2
Feet Features Rubber
Spreader Mid-Level
Center Column

 

OZEN Agile 18S Fluid Head Specs

Tripod Platform
Base Mount 100 mm Half Ball
Pan & Tilt
Drag Control Pan: Variable 7-Step Plus 0
Tilt: Variable 7-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -80°
Independent Pan Lock Yes
Independent Tilt Lock Yes
Physical
Material Aluminum, Stainless Steel
Load Capacity 4.4 to 48.4 lb / 2 to 21.95 kg
Counter Balance Incremental 16-Step
Pan Handle Fittings 2 x Rosette
Bubble Level 1 x Illuminated
Operating Temperature -40 to 140°F / -40 to 60°C
Dimensions 8.19 x 7.48" / 208 x 190 mm
Weight 10.3 lb / 4.7 kg

 

OZEN Soft Case For Single-Stage Heavy-Duty 100mm Systems For 100HD1 Tripod Specs

Physical
Carrying/Transport Options Shoulder Strap