OZEN OZEN-OZ-18CF2HDM AGILE 18M (E-Z LOAD MAX) w/2 extending pan bar + TR-100CF2HD heavy-duty tripod w/CONTENDER heavy duty mid-level spreader & deep-tread rubber feet + softcase

Vendor: OZEN
OZEN OZEN-OZ-18CF2HDM AGILE 18M (E-Z LOAD MAX) w/2 extending pan bar + TR-100CF2HD heavy-duty tripod w/CONTENDER heavy duty mid-level spreader & deep-tread rubber feet + softcase The OZEN OZEN-OZ-18CF2HDM 18M 100mm Fluid Head...
$6,151.25 $6,475.00

OZEN OZEN-OZ-18CF2HDM AGILE 18M (E-Z LOAD MAX) w/2 extending pan bar + TR-100CF2HD heavy-duty tripod w/CONTENDER heavy duty mid-level spreader & deep-tread rubber feet + softcase

The OZEN OZEN-OZ-18CF2HDM 18M 100mm Fluid Head with Two-Stage Carbon Fiber Legs, Mid-Level Spreader & Case is a professionally designed tripod system meant for use in digital cine cameras, as well as ENG, EFP, and studio applications. The heavy-duty head is responsive and precise, that comes with nine levels of pan and tilt adjustment (including a zero setting), as well as 16 settings of counterbalance for fine-tuning your camera. The carbon fiber legs are created featuring a 100mm bowl for use in quick leveling and capable of supporting up to 99 lb., which is more than enough for supporting the weight of the included head and its maximum load capacity without approaching the legs' limits.

The head comes featuring a true quick release plate and a sliding camera platform for having balance adjustments. The legs are made featuring two locks per leg and a wide height range, and the mid-level spreader is offering a numerous advantages over a ground spreader. The dual spike feet are excellent for the creation of grip by the time of shooting on soft terrain, and the removable rubber feet snap over the foot spikes meant for working on hard surfaces and in delicate locations.

OZEN 18M E-Z LOAD MAX Fluid Head (48.4 lb Payload)
The OZEN 18M E-Z LOAD MAX Fluid Head is a professionally designed heavy-duty fluid head that comes along with the familiar placement of pan, tilt, and counterbalance controls to easily fit into your operating style. Built for fitting the needs of filmmakers along with cameras and rigs that are weighing up to 48.4 lb, the 100mm ball base that's allowing for fast leveling and comes providing a wide balancing platform, which is advantageous by the time of working with long lenses. The head comes featuring a quick release plate along with two 3/8"-16 threaded camera tie-down screws, and the camera platform comes with 2.36" of travel for balancing your camera on the head.

The nine steps of pan and tilt drag are independent of each other and allow for precise adjustment for matching the needs of your shot. A zero setting for each axis comes providing completely free movement for creating a whip pans and tilts. Individual pan/tilt locks that are allowing you for locking one axis while still operating the other. The counterbalance comes with a 16 steps of adjustment, which is giving you the capability to further tune the head to match the shot and your operating style. A built-in illuminated bubble level is a useful tool in dim lighting conditions for having a quickly leveling the head. Removable pan handle rosettes on the left and right side of the head that are allowing you for utilizing both included telescoping pan handles at once.

A 16-step counterbalance allows you to adjust the head for a variety of cameras and rigs weighing from 4.4 to 48.4 lb. The counterbalance system is designed to neutralize the weight of the head, so the fluid head will hold the tilt position you leave it in without having to hold it in place. When tilting, you don't have to fight the resistance of the counterbalance during a tilt move.

Pan and Tilt Drag
With nine steps and a zero setting, you can adjust the head for smooth movement when creating fast or slow moves. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.

QR Plate and Balance Adjustment
The E-Z LOAD MAX QR plate supports heavier camera rigs, pops in and out of the camera platform, and does not have any sliding balance adjustment. However, the camera platform that the plate pops into has 2.36" of back and forth adjustment to aid in balancing your camera on the head. An optional baseplate or VCT system for greater balance capability is customary with larger cameras.

100mm Leveling Ball
The 100mm leveling ball makes it quick to level the head on your tripod legs or other platforms. The large platform size allows you to adjust the balance of your camera and lens and keep the center of balance within the 4" wide platform, for smoother operation without straining the head.

Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.

Camera Tie-Down Mounting Screws
The head comes with one each 1/4"-20 and 3/8"-16 camera tie-down screw stored on the sides of the head, in addition to the two 3/8"-16 captured tie-down screws in the E-Z LOAD MAX QR plate.

OZEN 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod
Give your camera solid feet to stand on with the 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod from OZEN. Designed for heavy-payload and high-fluid-drag applications, this two-stage tripod supports up to 99 pounds and offers working heights ranging from 20 to 60". For greater rigidity, the 22mm diameter carbon fiber tripod leg tubes are pin-secured to their anchors—no glued joints. Flip brake levers are used to lock the legs into place, making for fast deployment and stowage. Moreover, the 100CF2HD comes equipped with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces.

  • For use with separately available 100mm fluid heads
  • Carbon fiber leg tubes are lighter and stiffer than aluminum, resist damage from minor impacts, and have less flex when using high increments of fluid drag
  • Carbon fiber tubes are pinned to their joints, not glued
  • Flat and angled spreader positions
  • Payload capacity of 99 pounds
  • Conspicuous red flip brake levers for fast deployment and stowage
  • Brake adjustment mechanism

OZEN 18M E-Z LOAD MAX Fluid Head (48.4 Lb Payload) Specs

Camera Plate
Camera Plate Features Quick Release
Camera Plate Type Touch & Go Plate L
Camera Mounting Screw 2 x 3/8"-16 Male
2 x 1/4"-20 Male
Tripod Platform
Camera Platform Adjustment Yes, (2.3" / 58.4 mm)
Base Mount 100 mm Half Ball
Pan & Tilt
Drag Control Tilt: Stepped 9-Step Plus 0
Pan: Stepped 9-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -80°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes
Load Capacity 4.4 to 48.4 lb / 2 to 22 kg
Counter Balance Incremental 16-Step
Bubble Level 1 x Illuminated
Weight 12.7 lb / 5.8 kg


OZEN 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod Specs

Head Mount Type 100 mm Bowl
Load Capacity 99 lb / 44.91 kg
Maximum Working Height 60" / 152.40 cm (with Spreader)
Minimum Working Height 20" / 50.80 cm (with Spreader)
Folded Length 28" / 71.12 cm
Materials Carbon Fiber
Weight 10.9 lb / 4.94 kg
Leg Lock Type Flip Lock
Leg Sections 3
Feet Features Rubber
Spreader Mid-Level