OZEN OZEN-OZ-25CF2 AGILE 25 150/FB (E-Z LOAD) w/2 extending pan bars + TR-150CF2 w/CONTENDER heavy-duty mid-level spreader & deep-tread rubber feet + softcase

Vendor: OZEN
OZEN OZEN-OZ-25CF2 AGILE 25 150/FB (E-Z LOAD) w/2 extending pan bars + TR-150CF2 w/CONTENDER heavy-duty mid-level spreader & deep-tread rubber feet + softcase The OZEN OZEN-OZ-25CF2 AGILE 25 Fluid Head with 2-Stage Carbon...
$8,260.25 $8,695.00

OZEN OZEN-OZ-25CF2 AGILE 25 150/FB (E-Z LOAD) w/2 extending pan bars + TR-150CF2 w/CONTENDER heavy-duty mid-level spreader & deep-tread rubber feet + softcase

The OZEN OZEN-OZ-25CF2 AGILE 25 Fluid Head with 2-Stage Carbon Fiber Legs, Mid-Level Spreader & Case is a professionally designed heavy-duty tripod system that is capable of handling a fully built-up digital cinema cameras. The head comes heavy-duty yet precise and responsive, with nine levels of pan and tilt adjustment (including a zero setting), as well as 16 steps of counterbalance for fine-tuning your camera. The fluid head comes along with 4.72" of travel adjustment, and the QR plate is popping into the head, which makes it easier for detaching and attaching the camera from the head. The small size of the QR plate is making it less obtrusive and easier for putting the camera on your shoulder. For accommodating the cameras along with extreme weight, the head comes featuring a discrete "build-lock" that holds the head at zero tilt so you are capable to assemble your camera and accessories without stressing the tilt brake.

The carbon fiber legs are corrosion resistant and more than strong enough for supporting your head and camera without approaching their load and twist limit. The legs are made featuring two locks per leg and a wide height range, and the mid-level spreader comes offering a numerous advantages over a ground spreader. The dual-spike feet are excellent for the creation of grip during the time of shooting on soft terrain, and the removable rubber feet snap over the foot spikes meant for working on hard surfaces or in delicate locations.

OZEN Agile 25 E-Z LOAD Fluid Head (150mm)
The OZEN Agile 25 E-Z LOAD Fluid Head is a professionally designed heavy-duty fluid head featuring a wide camera interface meant for having a steady support of camera rigs that are weighing up to 80 lb. The 150mm ball base is possible to be converted to a flat base for lower-profile, slider, or car rig applications. A Build-Lock system comes providing your gear security and you with peace of mind by the time of assembling your camera and accessories on the head. The camera platform comes along with 4.72" of travel for use in balancing the camera forward and back.

This head's familiar placement of pan, tilt, and counterbalance controls are created for offering comfort and ease while operating, and the 150mm ball base enables fast leveling. This fluid head features nine steps of pan and tilt drag plus a "0" setting for whip pans, 16 steps of counterbalance adjustment, and a built-in illuminated bubble level. Independent pan and tilt locks allow you to lock off one axis and still move the head on the other axis. Replaceable pan handle rosettes on the left and right side of the head enable you to use both included telescoping handles simultaneously.

150mm Leveling Ball/Flat Base
The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6" diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or other compatible support.
A 16-step counterbalance enables you to adjust the head for a variety of camera rigs weighing from 8.8 to 80 lb. A counterbalance system neutralizes the weight of the head, so it will hold the desired tilt position.
Pan and Tilt Drag
Nine steps and a zero setting enable you to adjust the head for smooth moves, fast or slow. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.
Build-Lock Safety System
The Build-Lock system allows you to engage a safety pin with the tilt at zero, preventing the tilt axis from moving, while you assemble the camera on the head without having to worry about stressing the pan lock or having the head tilt suddenly under an unbalanced load. Once the camera and accessories are assembled (built) and roughly centered on the head, release the pin and fine-tune the balance on the head.
QR Plate and Balance Adjustment
The E-Z LOAD QR plate supports heavier camera rigs, pops in and out of the camera platform, and does not have any sliding balance adjustment. However, the camera platform that the plate pops into has 4.72" of back and forth adjustment to aid in balancing your camera on the head. The use of an optional baseplate or VCT system for increased balancing ability is customary with larger cameras.
Dual Pan Handle Rosettes
Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.

OZEN Two-Stage Heavy-Duty Carbon Fiber 150mm Tripod with Mid-Level Spreader & Rubber Feet
The OZEN Two-Stage Heavy-Duty Carbon Fiber 150mm Tripod with Mid-Level Spreader & Rubber Feet is well suited for heavy digital cinema, as well as other cameras, for use with OZEN's AGILE 25 fluid heads. The legs can support the weight of the head, plus the head's maximum load, with enough wiggle room for comfort so you aren't pushing the limits of your system. The heavy-duty construction creates a stable platform that enables you to operate your head at the highest levels of drag resistance without the legs flexing as you pan and tilt.

The legs utilize rotating lever locks, one for each leg, that allow you to apply the torque necessary to secure your legs against the weight of your fluid head and camera system, preventing the legs from slipping while you operate the camera. The included removable mid-level spreader simplifies moving quickly from camera position to camera position, and it is ideal for use on uneven terrain, as well as flat surfaces. The removable rubber feet provide grip on hard surfaces and can be easily removed for working on soft surfaces, such as sand or dirt.

  • Carbon fiber legs are lightweight and strong, as well as being corrosion resistant, especially to saltwater, which makes them ideal for use on boats and the seashore.
  • Two-stage legs usually have a wider height range and fold down more compactly than similar single-stage legs.
  • The legs support 120 pounds of head and accessories, allowing you to mount a heavy-duty fluid head and accessories.
  • The independent leg spread and height adjustment allows you to use the legs on oddly shaped areas as well as steps.
  • The mid-level spreader allows the legs to remain stable when on uneven and rocky terrain such as gravel, rocky ground, and steps.
  • Removable rubber feet protect delicate surfaces from the foot spikes, and the deep rubber tread provides good grip on hard surfaces.
  • The legs feature spiked feet that provide solid purchase in soft surfaces when not using a spreader.

OZEN Agile 25 E-Z LOAD Fluid Head (150mm) Specs

Camera Plate
Camera Plate Features Quick Release
Camera Mounting Screw 1 x 3/8"-16 Male
1 x 1/4"-20 Male
Tripod Platform
Camera Platform Adjustment 4.7" / 12.0 cm
Base Mount 150 mm Half Ball
Flat Base
Pan & Tilt
Drag Control Tilt: Stepped 9-Step Plus 0
Pan: Stepped 9-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -80°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes
Load Capacity 8.8 to 80 lb / 4 to 36.3 kg
Counter Balance Incremental 16-Step
Pan Handle Fittings 2 x Rosette
Bubble Level 1 x Illuminated
Weight 13.5 lb / 6.1 kg


OZEN Two-Stage Heavy-Duty Carbon Fiber 150mm Tripod With Mid-Level Spreader & Rubber Feet Specs

Head Mount Type 150 mm Bowl
Load Capacity 120 lb / 54.4 kg
Maximum Working Height 60" / 152.4 cm (with Spreader)
Minimum Working Height 20" / 50.8 cm (with Spreader)
Materials Carbon Fiber
Weight 12 lb / 5.4 kg
Leg Lock Type Rotating Locking Lever
Leg Sections 3
Feet Features Rubber, Dual Spiked
Spreader Mid-Level