Shure P10T PSM 1000 Dual Rack Unit Transmiitter

PSM 1000 Dual Rack Unit Transmitter

The P10T Full-Rack Dual-Channel Wireless Transmitter is designed by Shure it’s a wireless transmitter for the PSM 1000 system. Also, P10T can be used to deliver pristine RF signal and audio quality for professional touring applications while paired with Shure P10R or P10R+ wireless diversity bodypack receivers (sold separately) for live stages and theater events or permanent installations.

The P10T Full-Rack Dual-Channel Wireless Transmitter is built with an all-metal chassis, the dual-channel P10T permits for up to 2 programs to be transmitted simultaneously on different frequency channels. The P10T is featured with balanced 1/4" and XLR connections, as well as a 1/8" headphone jack on the front for monitoring. Its 72 MHz bandwidth is offering a wide tuning range for providing stable transmission. Other features include RF mute switch, LCD display, IR scan with P10R bodypack for RF sync, networked remote control via Wireless Workbench software, and PSM900 backward compatibility.

• RF Carrier Frequency Range:G10: 470 to 542 MHz
• Compatible Frequencies: Per Band: 39
• Tuning Bandwidth:72 to 80 MHz (depending on region)
• Operating Range:300' / 90 m (environment dependent)
• Frequency Response:35 Hz to 15 kHz (±1 dB)
• Signal to Noise Ratio:90 dB (typical) A-weighted
• Total Harmonic Distortion (THD):ref. ±34 kHz deviation @1 kHz <0.5% (typical)
• Companding:Patented Shure Audio Reference Companding
• Spurious Rejection:ref. 12 dB SINAD: >80 dB (typical)
• Frequency Stability:±2.5 ppm
• MPX Pilot Tone:19 kHz (±0.3 kHz)
• Modulation: FM (±34 kHz deviation @1 kHz) MPX stereo ref.
• Operating Temperature:0 to 135°F / -18 to 57°C

• RF Output Power:Selectable: 10, 50, 100 mW (+20 dBm)
• RF Output Impedance:50 Ohms (typical)
• Power Requirement:Input: 100 to 240 VAC, 50/60 Hz, 0.5 A max. (5.5, with outlet loaded) Output: 100-240 VAC, 50/60 Hz, 5 A max., unswitched
• Audio Input: Combination XLR and 1/4" /6.3 mm TRS
• Polarity:XLR: Non-inverting (pin 2 positive with respect to pin 3) 1/4" / 6.3 mm: Tip positive with respect to the ring
• Configuration: Electronically balanced
• Impedance: 70.2 kOhms (actual)
• Nominal Input Level: Switchable: +4 dBu, -10 dBV
• Maximum Input Level:+4 dBu: +29.2 dBu -10 dBV: +12.2 dBu
• Pin Assignments: XLR: 1=ground, 2=hot, 3=cold 1/4" / 6.3 mm TRS: Tip=hot, Ring=cold, Sleeve=ground
• Phantom Power Protection: Up to 60 VDC

• Connector Type: 1/4" / 6.3 mm TRS
• Configuration: Electronically balanced
• Impedance: Connected directly to inputs

• Dimensions (H x W x D): 1.7 x 19.0 x 13.5" / 4.3 x 48.3 x 34.3 cm
• Weight: 10.4 lb / 4.7 kg