QSC CX602V 2 channels, 550 watts/ch at 8Ω, 440 watts/ch at 70V

Vendor: QSC
Description QSC CX602V 2 channels, 550 watts/ch at 8Ω, 440 watts/ch at 70V The QSC has designed the CX Series to meet the specialized needs of sound contractors. Combining the exclusive QSC Powerlight...
$1,940.00
Title

QSC CX602V 2 channels, 550 watts/ch at 8Ω, 440 watts/ch at 70V

The QSC has designed the CX Series to meet the specialized needs of sound contractors. Combining the exclusive QSC Powerlight technology, it is designed with Eight 2-channel modes from the ground up, with specific features for meeting the requirement of fixed installations. With versatile loading options, unmatched reliability, high thermal capacity and high-output power, the QSC's CX Series surely the perfect solution to any permanently installed sound system. One of this is the QSC CX602V 2 channels, 550 watts/ch at 8Ω, 440 watts/ch at 70V.

Features

  • 70 Volt direct drive
  • Exclusive PowerLight switch-mode power supply technology for high performance and compact size
  • Custom integrated security cover for tamper proof installations
  • Variable speed fan for low noise
  • 1-dB detented gain controls for fast and accurate gain settings
  • Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
  • XLR and detachable Euro style input connectors
  • HD15 DataPort connector for Q-SYS networked control and monitoring
  • Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
  • Selectable high pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz )
  • Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
  • Barrier strip output connector
  • Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
  • Compact size - only 2 rack units high and 14" deep for reduced rack cost and floor space
  • Light weight - weighs only 21 pounds (9.5 kg) for easier racking and shipping
  • 3-year warranty plus optional 3-year extended service contract
  • All CX Series amplifiers meet the European Union's 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.
SPECIFICATIONS CX602V
  POWER PER CHANNEL, STEREO MODE, Both Channels Driven
8Ω, 20 Hz–20 kHz, 0.05% THD 550 W
4Ω, 20 Hz–20 kHz, 0.05% THD -
2Ω, 1 kHz, 1% THD -
70V, 20 Hz–20 kHz, 0.05% THD 400 W
70 V, 1 kHz, 0.05% THD 440 W
70 V, 1 kHz, 1% THD 600 W
  POWER, BRIDGED MONO MODE
16Ω, 20 Hz–20 kHz, 0.1% THD 1100 W
8Ω, 20 Hz–20 kHz, 0.1% THD -
4Ω, 1 kHz, 1% THD -
140 V, 20 Hz–20 kHz, 0.05% THD 800 W
140 V, 1 kHz, 0.05% THD 880 W
140 V, 1 kHz, 1% THD 1200 W
Noise, 20 Hz–20 kHz -106 dB
Input Sensitivity @ 8 ohms 1.26 Vrms
Maximum Voltage Gain 35 dB
Output Circuitry Class AB+B
  ALL MODELS
Distortion (SMPTE-IM) Less than 0.02%
Distortion (Typical)
20 Hz–20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power

Less than 0.01% THD
Less than 0.01% THD
Frequency Response 20 Hz–20 kHz, ±0.2 dB
Damping Factor   Greater than 500  
Input Impedance   6 kΩ unbalanced, 12 kΩ balanced  
Input Clipping   10 V rms (+22 dBu)  
Cooling   Variable-speed fan, rear-to-front air flow  
Connectors, each channel

  Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
Output: Safety-shrouded barrier strip
 
Amplifier Protection   Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
Stable into reactive or mismatched loads.
 
Load Protection   On/off muting, DC-fault power supply shutdown  
Dimensions (HWD) inches   3.5 x 19 x 14 / 2RU  
Dimensions (HWD) mm   89 x 483 x 356 / 2RU  
Weight   21 lb (9.5 kg) net
27 lb (12.3 kg) shipping