SE Electronics SE7-U, Small Diaphragm Cardioid Condenser Microphone with Clip, A compact & classy condenser.

Vendor: SE Electronics
Descriptions SE Electronics SE7-U, Small Diaphragm Cardioid Condenser Microphone with Clip, A compact & classy condenser. The SE Electronics SE7-U features a high-quality back-electret small diaphragm condenser microphone intended for a wide range...
$99.00
Title

SE Electronics SE7-U, Small Diaphragm Cardioid Condenser Microphone with Clip, A compact & classy condenser.

The SE Electronics SE7-U features a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.

Because of the unique optimized acoustic design, the SE Electronics SE7-U has a discrete class-A circuitry and a transformerless output, it can delivers clear, natural sound quality at all frequencies, without suffering from flizzy highs or a lack of low-frequency punch.

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

SE Electronics SE7-U Main Features

  • HIGH-QUALITY CONDENSER CAPSULE
  • THE QUIETEST PENCIL MIC IN ITS CLASS
  • SWITCHABLE PRE-ATTENUATION PAD
  • SWITCHABLE LOW-CUT FILTER
  • ALL-METAL HOUSING WITH GOLD-PLATED XLR CONNECTOR, PREMIUM FINISH & ACCESSORIES

Capsule Type: 1/2“ back-electret condenser capsule

Polar Pattern: Cardioid

Frequency range: 20 Hz - 20 kHz

Sensitivity: 19 mV/Pa (-34.5 dBV)

Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)

Equivalent noise level: 16 dB(A)

Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)

Signal to Noise Ratio: 78 dB

Low-cut filter: 80 Hz, 6 dB/Oct, switchable

Attenuation Pad: 20 dB, switchable

Powering: 48 Volts according to IEC 61938

Electrical Impedance: <200 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male XLR connector

Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)

Weight: 128 g (4.52 oz.)