Shure MX392/C Cardioid - Condenser Boundary Microphone, Built-in Preamp, Attached 12' Unterminated Cable, Logic Functions, Programmable Switch and LED Indicator

Vendor: Shure
Shure MX392/C Cardioid - Condenser Boundary Microphone, Built-in Preamp, Attached 12' Unterminated Cable, Logic Functions, Programmable Switch and LED Indicator The Shure’s MX392 is a surface-mounted and an electret condenser microphone. MX392 is designed to...
$287.00 $402.00
Title

Shure MX392/C Cardioid - Condenser Boundary Microphone, Built-in Preamp, Attached 12' Unterminated Cable, Logic Functions, Programmable Switch and LED Indicator

The Shure’s MX392 is a surface-mounted and an electret condenser microphone. MX392 is designed to get mounted on conference tables, stage floors, and lecterns. It is high in sensitivity and having a huge frequency range that is making it especially suitable to pick up speech and vocals in sound reinforcement and recording applications. MX392 is interchangeable cartridges providing the installer with greater flexibility and for making it possible to easily reconfigure microphone coverage as the need arises. An internal preamplifier is also included in Shure’s MX392 microphone.

 MX392 series microphones take advantage of the principle that, at a barrier or boundary, the sound pressure level doubles. When placed near a sufficiently large boundary surface, the microphone has 6 dB higher sensitivity and approximately 3 dB greater direct-to-reverberant sound ratio.

  • Flat frequency response across the vocal range for uncolored sound<
  • Interchangeable cartridges that provide a choice of polar pattern for each application
  • Sleek, low-profile design for surface mounting
  • Balanced, transformerless output for increased immunity to noise
  • Programmable mute button
  • LED indicator
  • Logic input/output for remote control or use with automatic mixers
  • RF filtering

Shure MX392

Analog Performance

  • Transducer: Electret Condenser
  • Polar Pattern: Cardiod
  • Frequency Range: 50 Hz to 17 kHz
  • Signal To Noise Ratio: 71 db
  • Equivalent Noise Ratio: 23 db A- Weighted
  • Maximum SPL: 119 db SPL
  • THD: 1%
  • Impedance:180 Ohms
  • Sensitivity:-30 dB
  • Dynamic Range:-96 dB
General
  • Cable Length:12' / 3.66 m
  • Operating Current Consumption:-30 dB
  • Operating Voltage:11 to 52 V
  • Operating Temperature:0 to 135°F / -17.78 to 57.22°C
  • Operating Humidity:0 to 95%
  • Storage Temperature:-20 to 165°F / -28 to 73.89°C
  • Length:4.264" / 108.31 mm
  • Weight:0.38 lb / 172 g)