Shure MXCWAPT, Access Point Transceiver

Vendor: Shure
Shure MXCWAPT, Access Point Transceiver The MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in...
$3,679.00 $5,150.00
COUNTRY

Shure MXCWAPT, Access Point Transceiver

The MXCWAPT Access Point Transceiver manages audio routing, frequency coordination, and system control for up to 125 wireless conference units. The MXCWAPT automatically selects the clearest channel in the 2.4 GHz and 5 GHz frequency bands and switches channels to avoid potential interference. The access point provides both Dante™ and analog audio inputs and outputs and uses a single Ethernet connection for power, audio, and control.

MAIN FEATURES

  • Controls up to 125 MXCW640 wireless conference units
  • The bi-directional wireless connection provides audio to and from conference units and enables real-time control of all settings
  • Operates in 2.4 GHz / 5 GHz frequency bands, including DFS spectrum
  • Automatic frequency coordination, interference detection, and avoidance
  • Dante digital audio (10 inputs/10 outputs)
  • Analog audio input and output (XLR)
  • One Ethernet cable for audio, control, and PoE power
  • AES-128 encryption for enhanced privacy
  • Display for basic system configuration without a laptop
  • LEDs indicate power, wireless connection, and network status
  • Includes wall/ceiling mounting plate
Analog Audio Inputs
Maximum Input Level 24.9 dBV (1% THD+N. Measured at Dante Output. Line Level, Analog Input Gain = 0 dB, Dante Output Gain =  0 dB)
10.3 dBV (1% THD+N. Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain =  0 dB)
Frequency Response 22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Line Level, Analog Input Gain = 0  dB, Dante Output Gain = 0 dB)
22 Hz to 20 kHz (+0.5 dB/-3 dB, Measured at Dante Output. -6 dBFS Input, Aux Level, Analog Input Gain = 0  dB, Dante Output Gain = 0 dB)
Total Harmonic Distortion/Noise 0.03%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Line Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
0.02%, Typical (Measured at Dante Output. -6 dBFS Input, 1 kHz, Aux Level, AnalogInput Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range 115 dB [A-Weighted, 113 dB (Unweighted), Typical Measured at Dante Output. Line Level, Analog Input Gain  = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
112 dB [A-Weighted, 110 dB (Unweighted), Typical Measured at Dante Output. Aux Level, Analog Input Gain = 0 dB, Dante Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Equivalent Input Noise Preamplifier
-92 dBV (A-Weighted, Typical Line Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
-104 dBV (A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW)
Connector Type XLR-3-Pin Female (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -)
Analog Audio Outputs
Maximum Output Level 4.3 dBV (1% THD+N. Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB)
Frequency Response 1 Hz to 20 kHz (+0.5 dB/-3 dB) Audio Injected at Dante Input. -6 dBFS input, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB
Total Harmonic Distortion/Noise 0.01% (Typical, Audio Injected at Dante Input. -6 dBFS input, 1 kHz, Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW)
Dynamic Range (Typical) 100 dB [A-Weighted, 97 dB (Unweighted), Typical Audio Injected at Dante Input. Dante Input Gain = 0 dB, Analog Output Gain = 0 dB, 22 Hz to 22 kHz BW]
Load Impedance >600 Ohms, Typical
Connector Type 3-Pin XLR Male [Standard XLR Pinout (Pin 1 = Ground, Pin 2 = Audio +, Pin 3 = Audio -]
Ground Lift XLR GND Lift Switch Position - "Left (Pin 1-GND Connected) Right (Pin 1-GND Disconnected)"
Equivalent Noise Level -104 dBV [A-Weighted, Typical Aux Level, Analog Input Gain = 0 dB, 22 Hz to 22 kHz BW] Input Impedance 10 Kilohms Line Level
Input Impedance 10 Kilohms, Line Level
12 Kilohms, Aux Level
Configuration Balanced
RF Specification
IEEE WLAN Standard IEEE 802.11 a, g
Frequency Bands 2.4 GHz ISM, 5 GHz UNII
Sensitivity -80 dBm at 10% PER
RF Output Power 1 mW (Low), 5 mW (Medium), 13 mW (High), 25 mW (Maximum)
Antenna Type Proprietary Internal Bi-Level Dual-Band (PIFA), Patent Pending
Power
Supply Type Power over Ethernet (PoE) 802.2 af, Class 0 PD
Supply Voltage 37 to 57 V
Power Consumption 12.95 W Maximum, 6.5 W Typical
Network
Interface Gigabit Ethernet, Dante Digital Audio
Link Speed: 10/100/1000 Mb/s
Network Addressing Capability DHCP or Manual IP Address
Cable Length 328' / 100 m Maximum
Cable Type Cat 5e or Higher
Display
Type Monochrome FFSTN LCD
Display Size 1.84 x 0.074" / 46.7 x 18.8 mm
Display Resolution 152 x 78 (78 ppi)
General
Housing Molded Plastic, Die-Cast Aluminum
Mounting Ceiling Bracket or Wall
Operating Temperature Range 19.4 to 120.2° F / 7 to 49° C
Storage Temperature -20.2 to 140° F / -29 to 60° C
Dimensions 1.88 x 9.55 x 9.52" / 47.8 x 242.5 x 241.8 mm
Weight 2.54 lb / 1.15 kg