Shure ULXD4 Wireless Single Channel Receiver

Vendor: Shure
Shure ULXD4D The Shure ULXD4 is a single channel wireless receiver. Its the first in its family of wireless receivers such as the ULXD4D ( Dual Receiver) and the ULXD4Q ( QUAD Receiver)....
$875.00 $999.00
Frequency

Shure ULXD4D

The Shure ULXD4 is a single channel wireless receiver. Its the first in its family of wireless receivers such as the ULXD4D ( Dual Receiver) and the ULXD4Q ( QUAD Receiver). It is Network ready and can be used in any combination of the other receivers. It offer superb 24 bit technology sample rate. Its very efficient when compared to other brands and systems. This is more tailored towards churches and live productions. If your a corporate customer you can also see a lot of benefits in purchasing this professional system

Uncompromising Professional Digital Wireless

  • 24-bit/48 KHz digital audio that exceeds all other systems in accurate reproduction of the source material
  • 20 Hz – 20 KHz frequency range with flat response
  • Greater than 120 dB dynamic range for excellent signal-to-noise performance
  • Advanced Encryption Standard (AES-256) for any application where secure transmission is needed:
    • AES algorithm used in Shure ULX-D Wireless has been validated (validation no: 2552) by the National Institute of Standards and Technology (NIST) as conforming to the Advanced Encryption Standard (AES) Algorithm, as specified in Federal Information Processing Standard (FIPS) Publication 197, Advanced Encryption Standard
    • Enabled via front panel menu and IR sync
    • Added benefit of eliminating stray RF interference by allowing only encrypted signal through to the receiver
  • Built-in limiter circuitry prevents digital audio clipping from excessive signal levels.
  • 60 dB of adjustable system gain easily accessible from the receiver front panel
  • No transmitter gain adjustments needed - optimized for any input source
  • Wide selection of trusted Shure Microphones

Extremely Efficient and Reliable RF Performance

  • Up to 64 MHz overall tuning range (region dependent)
  • Minimized intermodulation distortion results in significantly more channels on air, setting the bar for wireless performance in crowded RF environments
    • 17 active transmitters in one 6 MHz TV channel
    • 22 active transmitters in one 8 MHz TV channel
    • High Density mode enables up to 47 active transmitters in one 6 MHz TV channel (63 in one 8 MHz TV channel), with no audio quality degradation
    • Over 60 compatible channels on one frequency band
  • Rock-solid signal stability with no audio artifacts extends over the entire 100 meter line-of-sight range using standard supplied dipole antennas
  • Selectable 1, 10, and 20 mW transmitter RF output power (region dependent)
  • Optimized scanning automatically finds, prioritizes, and selects the cleanest frequencies available

Rugged, Intelligent Hardware

  • Optimized scanning automatically finds and deploys the cleanest frequencies available
  • Proprietary Shure Gain Ranging optimizes system dynamic range for any input source, eliminating the need for transmitter gain adjustments
  • Up to 60 dB of adjustable system gain is easily accessible from the receiver front panel
  • Networkable receiver simplifies setup across multiple channels
  • Compatible with external controllers such as AMX and Creston. Cross-subnet control enabled for management between multiple facilities or venues.
  • Rugged metal housing on both transmitters and receiver
  • Interference detection and alerts provide instant confirmation when interference is present
  • Upgraded LCD screens with adjustable contrast and brightness on both transmitters and receivers

Advanced Rechargeability - SB900 Shure Rechargeable Battery

  • Lithium-Ion chemistry and intelligent Shure battery circuitry results in rechargeable batteries with no memory effect. The battery can be recharged at any time; a complete discharge is never necessary
  • Adapted from industry-leading Axient® rechargeable technology
  • Lithium-Ion chemistry and intelligent Shure battery circuitry results in rechargeable batteries with zero memory effect and precision metering
  • Provides ULX-D transmitters with greater than 11 hours of continuous use
  • Transmitters and receivers display remaining battery life in hours and minutes accurate to within 15 minutes
  • The SBC200 Dual Docking Charger recharges batteries while in transmitters or out
  • The SBC800 Eight-Bay Charger brings up to eight SB900 batteries to full charge within three hours and 50% charge in one hour, with charge status LEDs for each battery
  • AA alkaline backwards compatibility
  • Both chargers fit in a standard-size rack drawer for easy transport and storage

Frequency Band You can Purchase the ULXD Wireless systems in are
Tunable Frequency Range (MHz)

G50 (64 MHz) 470-534 MHz ,

H50 (64 MHz) 534-598 MHz ,

J50 (64 MHz) 572-636 MHz ,

L50 64 MHz) 632-696 MHz ,

  • ULXD Specifications
  • RF Carrier Frequency Range
  • 470–814 MHz, varies by region (See Frequency Range and Output Power table)
  • Working Range 100 m (330 ft)
  • Note: Actual range depends on RF signal absorption, reflection and interference.
  • RF Tuning Step Size 25 kHz, varies by region
  • Image Rejection >70 dB, typical
  • RF Sensitivity
  • -98 dBm at 10-5 BER
  • Latency <2.9 ms
  • Audio Frequency Response
  • ULXD1 20 – 20 kHz (±1 dB)
  • ULXD2 Note: Dependent on microphone type
  • Audio Dynamic Range
  • System Gain @ +10 >120 dB, A-weighted, typical
  • Total Harmonic Distortion −12 dBFS input, System Gain @ +10 <0.1%
  • System Audio Polarity
  • Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
  • Operating Temperature Range -18°C (0°F) to 50°C (122°F)
  • Note: Battery characteristics may limit this range.
  • Storage Temperature Range -29°C (-20°F) to 74°C (165°F)
  • Note: Battery characteristics may limit this range.
  • Receiver Output Level
  • The following table describes the typical total system gain from the audio input to the receiver outputs:
  • Receiver Output Gain
  • Output Jack System Gain (gain control = 0dB) 1/4" TRS +18 dB XLR (line setting) +24 dB XLR (mic setting) -6 dB*