Shure VP89M Medium Condenser Shotgun Microphone with Case and Foam Windscreen

Vendor: Shure
Shure VP89M Medium Condenser Shotgun Microphone with Case and Foam Windscreen The VP89M Modular Shotgun Microphone designed by Shure featured with an interchangeable capsule that displays high RF (Radio Frequency) rejection, superior side noise...
$899.00 $1,124.00
Title

Shure VP89M Medium Condenser Shotgun Microphone with Case and Foam Windscreen

The VP89M Modular Shotgun Microphone designed by Shure featured with an interchangeable capsule that displays high RF (Radio Frequency) rejection, superior side noise rejection, and is paired with the detachable VP89 Preamp. Long, short and medium sized capsule barrels are available to suite various rejection angles, recording needs and frequency response types.

This model ships with the medium capsule, and includes a windscreen and zippered pouch. The state-of-the-art low noise preamplifier design features a low frequency roll-off switch for eliminating noise below 200Hz. The usefulness of the microphone can be further extended by buying one of the other length capsule and simply attaching it to the already included preamp.

  • State-of-the-art preamplifier redesign
  • Superior RF immunity
  • Internal low-frequency roll-off
  • Recessed low-cut filter switch for additional control
  • Smaller footprint
  • Superior Shure design and rugged, roadworthy construction.

Medium Capsule Design

  • Features a narrow pickup angle and wide target aperture for greater degree of ambience (audience response, talk shows, live concerts)
  • Unmatched quality of off-axis rejection

Shure VP89

  • Transducer: Electret Condenser
  • Polar Pattern: Hypercardioid / Lobar
  • Frequency Response: 100Hz to 20kHz
  • Dynamic Range (Typical): Dynamic Range (@ 1 kHz)
    2500 Ohms load: 117.0dB
    1000 Ohms load: 113.5dB
  • Signal-to-Noise Ratio: 79.0dB
  • Maximum Input Sound Level: 2500 Ohms load: 132.0dB SPL
    1000 Ohms load: 128.5dB SPL
  • Input Clipping Level: Clipping Level (@ 1 kHz, 1% THD)
    2500 Ohms load: 4.0 dBV
    1000 Ohms load: 0.0 dBV
  • Power Requirements: 11-52V DC phantom power (IEC-61938), <2.0 mA
  • Output Impedance: 115.0 Ohms
  • Sensitivity: -33.5 dBV/Pa (2.11 mV)
  • Noise: Self Noise (equivalent SPL, A-weighted, typical):
    15.0 dB
  • Output Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Low Frequency Roll-Off: 200Hz
  • Temperature: Operating: -18°C (0°F) to 57°C (135°F)
    Storage: -29°C (-20°F) to 74°C (165°F)
  • Power Requirements: 11-52V DC phantom power (IEC-61938), < 2.0 mA
  • Weight: VP89L: 174g (6.1 oz.)
    VP89M: 138g (4.9 oz.)
    VP89S: 117g (4.1 oz.)

Packaging Info

  • Package Weight: 1.85 lb
  • Box Dimensions (LxWxH): 16 x 3.6 x 3.4"