Sony Professional ECM-673/9X, Shotgun Microphone
Vendor: Sony
Available
Sony Professional ECM-673/9X, Shotgun Microphone
With a compact form and smooth tone, the Sony Professional ECM-673/9X shotgun microphone offers a strong, clean output signal for event video shoots, indie film production, TV and documentary shooting, courtroom depositions, and more. Plus, its 7.9" long body is short enough to be placed atop a camera while maintaining focused directional behavior and keeping out of the camera's view. The Sony Professional ECM-673/9X features a super-cardioid polar pattern for excellent directivity and minimal noise at the off-axis sections of the capsule, resulting in intelligible voice pickup even in noisy environments. The microphone's wide, flat frequency response yields natural, accurate signal reproduction with crisp detail and minimal coloration. The Sony Professional ECM-673/9X runs on 40 to 52 VDC phantom power, making it compatible with a variety of professional camcorders, multitrack field recorders, and portable audio recorders. It includes microphone spacers and a mic holder to accommodate camera-mount and stand-mount configurations.
Lightweight Design
The ECM-673 has been designed as a highly directional, compact, and lightweight shotgun microphone, measuring 7.9" in length and weighing just 4.8 ounces to ensure good balance even when mounted on compact camcorders.
Smooth Frequency Response
With its flat and wide frequency response of 40 Hz to 20 kHz, the ECM-673 provides sound reproduction that is smooth and natural.
High Sensitivity
The ECM-673 offers an excellent sensitivity of -36 dB and a low self-noise level of less than 17 dB SPL, allowing the microphone to be used for clear voice capture even in noisy environments.
Onboard Low-Cut Filter
The onboard two-position (M, V) low-cut switch provides users with a simple method of reducing the effects of undesired ambient noise such as rumble.
Phantom Powered
The ECM-673 can be driven by 40 to 52 VDC phantom power for consistent, battery-free operation with professional camcorders, multitrack field recorders, and portable audio recorders.
High Durability and Reliability
The vibration-resistant mechanism of the ECM-673 offers high durability and reliability, making it suitable for the harsh environments that can be encountered in field recording.
Included Accessories
The ECM-673 is supplied with a windscreen that attenuates wind noise by approximately 5 dB, a short XLR cable, a microphone holder (for use on a mic stand), two stand adapters, a molded-type microphone spacer, and a sheet-type microphone spacer.
Sony Professional ECM-673/9X Main Features
- For Indie Films, TV & Documentaries
- Phantom Powered
- Switchable Low-Cut Filter
- High Sensitivity Requires Less Gain
- Smooth Tone for Voice Reproduction
- Vibration-Resistant Mechanism
- Compact and Lightweight Housing
- Windscreen Reduces Wind Noise
- XLR Cable, Mic Spacers & Mic Holder
Form Factor | Stand/Boom Mount |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | 1 x Electret Condenser |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | Yes |
Tone Adjustment | None |
Indicators | None |
On-Board Controls | High-Pass Filter |
Windscreen | Foam (Included) |
Frequency Range | 40 Hz to 20 kHz |
Maximum SPL | 124 dB SPL (1 kHz, 1% THD) |
Off-Axis Rejection | 5 dB at 60° >17 dB at 120° >13 dB at 180° |
Impedance | 220 Ohms ± 20% at 1 kHz (Balanced) |
Sensitivity | -36 dBV/Pa at 1 kHz |
Dynamic Range | 107 dB |
Signal-to-Noise Ratio | 77 dB A-Weighted (1 kHz) |
Equivalent Noise Level | 17 dB SPL |
Output Connectors (Analog) | 1 x XLR 3-Pin Male |
Headphone Connector | None |
Cable Length | 19.69" / 50 cm |
Operating Voltage | 40 to 52 V (Phantom Power) |
Operating Current Consumption | 2 mA |
Mounting | Mic Clip (Included) |
Operating Temperature | 32 to 122°F / 0 to 50°C |
Storage Temperature | -4 to 140°F / -20 to 60°C |
Dimensions | ø: 0.79 x L: 7.87" / ø: 20 x L: 200 mm |
Weight | 4.76 oz / 135 g |